HP Pavilion 17-g000 17-g099 AMD Models - Maintenance and Service Guide - Page 59
USB board, Disconnect the larger cable from the system board
View all HP Pavilion 17-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
USB board Description USB board (includes cable) Spare part number 809927-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the optical drive (see Optical drive on page 28). 6. Remove the bottom cover (see Bottom cover on page 32). To remove the USB board: 1. Position the computer upright. 2. Disconnect the larger cable from the system board (1). 3. Disconnect the smaller cable from the USB board that routes to the power button board (2) 4. Remove the two Phillips PM2.5×3.0 screws (3) that secure the USB board to the computer. 5. Remove the USB board (4). Reverse this procedure to install the USB board. Component replacement procedures 51