HP Pavilion 17-g000 17-g099 AMD Models - Maintenance and Service Guide - Page 63
TouchPad, Remove the three Phillips PM2.5×3.0 screws
View all HP Pavilion 17-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TouchPad Description TouchPad board (includes bracket) TouchPad board in pale gold (includes bracket) Spare part number 811552-001 836868-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the optical drive (see Optical drive on page 28). 6. Remove the bottom cover (see Bottom cover on page 32). 7. Remove the system board (see System board on page 48). To remove the TouchPad: 1. Remove the three Phillips PM2.5×3.0 screws (1) that secure the TouchPad bracket to the computer. 2. Remove the bracket (2). 3. Lift the keyboard cable (1) to gain access to the TouchPad screws. 4. Remove the three broadhead Phillips PM2.0×2.0 screws (2) that secure the rear bracket and the TouchPad to the computer. Component replacement procedures 55