HP Pavilion HDX9575LA HP Pavilion HDX Entertainment Notebook PC - Maintenance - Page 53

Hard drive, Loosen the Phillips PM2.5×12.0 screw

Page 53 highlights

Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 250-GB, 5400-rpm 200-GB, 4200-rpm 160-GB, 5400-rpm 120-GB, 7200-rpm 120-GB, 5400-rpm 100-GB, 7200-rpm Spare part number 454605-001 448155-001 448154-001 448152-001 448153-001 452313-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). Remove the hard drive: 1. Loosen the six black Phillips PM2.0×5.0 captive screws (1) that secure the hard drive bay cover to the computer. 2. Lift the rear edge of the hard drive bay cover (2), swing it forward, and remove the cover. The hard drive bay cover is included in the Plastics Kit, spare part number 448171-001. 3. Loosen the Phillips PM2.5×12.0 screw (1) that secures each hard drive to the computer. 4. Disconnect the hard drives (2) from the system board by sliding the hard drives away from the hard drive connectors. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163

Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
250-GB, 5400-rpm
454605-001
200-GB, 4200-rpm
448155-001
160-GB, 5400-rpm
448154-001
120-GB, 7200-rpm
448152-001
120-GB, 5400-rpm
448153-001
100-GB, 7200-rpm
452313-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery
on page
38
).
Remove the hard drive:
1
.
Loosen the six black Phillips PM2.0×5.0 captive screws
(1)
that secure the hard drive bay cover to
the computer.
2
.
Lift the rear edge of the hard drive bay cover
(2)
, swing it forward, and remove the cover. The hard
drive bay cover is included in the Plastics Kit, spare part number 448171-001.
3
.
Loosen the Phillips PM2.5×12.0 screw
(1)
that secures each hard drive to the computer.
4
.
Disconnect the hard drives
(2)
from the system board by sliding the hard drives away from the hard
drive connectors.
Component replacement procedures
45