HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 106
Diagnostics menu, System Configuration menu
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Diagnostics menu Computer Setup Select System Diagnostics Menu To do this ■ System Information-Displays the following information: ❐ Identification information for the computer and the batteries in the system. ❐ Specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. ■ Start-up Test-Verifies the system components needed for starting the computer. ■ Run-In Test-Runs a comprehensive check on system memory. ■ Hard Disk Test-Runs a comprehensive self-test on any hard drive in the system. System Configuration menu ✎ Some of the listed System Configuration options may not be supported by your computer. Select Language Boot Options Device Configurations To do this Change the Computer Setup language. ■ Set a Startup Menu delay (in seconds). ■ Enable/disable Custom Logo (disabled by default). ■ Enable/disable CD-ROM boot (enabled by default). ■ Enable/disable SD Card boot (enabled by default). ■ Enable/disable floppy boot (enabled by default). ■ Enable/disable PXE Internal NIC boot (enabled by default). ■ Set the Express Boot Popup delay in seconds. ■ Set the boot order. ■ Enable/disable USB legacy support (enabled by default). When enabled, USB legacy support allows the following: ❐ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. ❐ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. ■ Enable/disable fan always on while connected to an AC outlet (enabled by default). ■ Enable/disable Data Execution Prevention. When enabled, the processor can disable some virus code execution, which helps to improve computer security (enabled by default). (Continued) Maintenance and Service Guide 5-5