HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 76

Remove the four Phillips PM2.5×4.0 screws, If it is necessary to replace the webcam module

Page 76 highlights

Removal and replacement procedures b. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge 3 of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel 4. The display bezel is available using the following spare part numbers: ◆ 577194-001-for use only on computer models equipped with a webcam ◆ 577195-001-for use only on computer models not equipped with a webcam 15. If it is necessary to replace the webcam module: a. Remove the four Phillips PM2.5×4.0 screws 1 that secure the display panel to the display enclosure. b. Remove the display panel cable from the clips 2 built into the display enclosure. c. Remove the display panel 3. Maintenance and Service Guide 4-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159

Removal and replacement procedures
Maintenance and Service Guide
4–31
b.
Flex the inside edges of the top edge
1
, the left and right sides
2
, and the bottom edge
3
of the display
bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
4
. The display bezel is available using the following spare part numbers:
577194-001—for use only on computer models equipped with a webcam
577195-001—for use only on computer models not equipped with a webcam
15. If it is necessary to replace the webcam module:
a.
Remove the four Phillips PM2.5×4.0 screws
1
that secure the display panel to the display enclosure.
b.
Remove the display panel cable from the clips
2
built into the display enclosure.
c.
Remove the display panel
3
.