HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 73
from the opening in the top cover., Remove the wireless antenna cables
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and replacement procedures Remove the display assembly: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Remove the WLAN and WWAN antenna cables 1 from the clips 2 built into the base enclosure. 4. Turn the computer display-side up, with the front toward you. 5. Open the computer as far as possible. 6. Disconnect the microphone cable 1 from the system board. 7. Remove the wireless antenna cables 2 from the opening in the top cover. 8. Remove the wireless antenna cables and the microphone cable from the clips 3 and routing channel built into the top cover. 9. Release the grounding tape 4 that covers the wireless antenna cables and microphone cable. 4-28 Maintenance and Service Guide
4–28
Maintenance and Service Guide
Removal and replacement procedures
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Remove the WLAN and WWAN antenna cables
1
from the clips
2
built into the base enclosure.
4. Turn the computer display-side up, with the front toward you.
5. Open the computer as far as possible.
6. Disconnect the microphone cable
1
from the system board.
7. Remove the wireless antenna cables
2
from the opening in the top cover.
8. Remove the wireless antenna cables and the microphone cable from the clips
3
and routing channel built into
the top cover.
9. Release the grounding tape
4
that covers the wireless antenna cables and microphone cable.