HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 66
Two slotted Torx T8M2.5×7.0 screws, One Phillips PM2.0×2.0 broadhead screw
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removal and replacement procedures Remove the keyboard and switch cover: 1. Position the computer with the front toward you. 2. Remove the following screws: ❏ Two slotted Torx T8M2.5×7.0 screws 1 that secure the switch cover to the computer ❏ Two Phillips PM2.0×5.0 screws 2 that secure the switch cover to the computer in the battery bay ❏ One Phillips PM2.0×2.0 broadhead screw 3 that secures the switch cover to the computer in the battery bay ❏ Two slotted Torx T8M2.5×7.0 screws 4 that secure the keyboard to the computer 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Lift the switch cover until it releases from the computer. Maintenance and Service Guide 4-21
Removal and replacement procedures
Maintenance and Service Guide
4–21
Remove the keyboard and switch cover:
1. Position the computer with the front toward you.
2. Remove the following screws:
❏
Two slotted Torx T8M2.5×7.0 screws
1
that secure the switch cover to the computer
❏
Two Phillips PM2.0×5.0 screws
2
that secure the switch cover to the computer in the battery bay
❏
One Phillips PM2.0×2.0 broadhead screw
3
that secures the switch cover to the computer in the battery bay
❏
Two slotted Torx T8M2.5×7.0 screws
4
that secure the keyboard to the computer
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the switch cover until it releases from the computer.