HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 80
Remove the WWAN wireless antenna transceivers and cables. The wireless antenna transceivers and cables
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removal and replacement procedures 20. If it is necessary to replace the WWAN wireless antenna transceivers and cables: a. Detach the transceivers 1 from the display enclosure. (The transceivers are attached to the enclosure with double-sided tape.) b. Release the WWAN wireless antenna cables 2 from the clips and routing channels built into the left and right sides of the display enclosure. c. Remove the WWAN wireless antenna transceivers and cables. The wireless antenna transceivers and cables are included in the Display Cable Kits, using the following spare part numbers: ◆ 577228-001-for use only on computer models equipped with WWAN capability ◆ 578365-001-for use only on computer models not equipped with WWAN capability Reverse this procedure to reassemble and install the display assembly. Maintenance and Service Guide 4-35