HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 64
Remove the optical drive bracket, Reverse this procedure to reassemble and install the optical drive.
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and replacement procedures 4. If it is necessary to replace the optical drive bracket, follow these steps: a. Position the optical drive with the rear toward you. b. Remove the three Phillips PM2.0×4.0 screws 1 that secure the optical drive bracket to the optical drive. c. Remove the optical drive bracket 2. Reverse this procedure to reassemble and install the optical drive. Maintenance and Service Guide 4-19
Removal and replacement procedures
Maintenance and Service Guide
4–19
4. If it is necessary to replace the optical drive bracket, follow these steps:
a.
Position the optical drive with the rear toward you.
b.
Remove the three Phillips PM2.0×4.0 screws
1
that secure the optical drive bracket to the optical drive.
c.
Remove the optical drive bracket
2
.
Reverse this procedure to reassemble and install the optical drive.