HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 68
double-sided tape., Disconnect the speaker cable
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removal and replacement procedures 9. Remove the keyboard. 10. Release the ZIF connector 1 to which the LED board cable is attached, and then disconnect the LED board cable 2 from the system board. 11. Detach the LED board cable 3 from the top cover. (The LED board cable is attached to the top cover with double-sided tape.) 12. Disconnect the speaker cable 4 from the system board. 13. Remove the switch cover 5. Reverse this procedure to install the keyboard and switch cover. Maintenance and Service Guide 4-23
Removal and replacement procedures
Maintenance and Service Guide
4–23
9. Remove the keyboard.
10. Release the ZIF connector
1
to which the LED board cable is attached, and then disconnect the LED board
cable
2
from the system board.
11. Detach the LED board cable
3
from the top cover. (The LED board cable is attached to the top cover with
double-sided tape.)
12. Disconnect the speaker cable
4
from the system board.
13. Remove the switch cover
5
.
Reverse this procedure to install the keyboard and switch cover.