HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 82
Remove the five slotted Torx T8M2.5×7.0 screws, Release the network cable from the clips
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removal and replacement procedures 3. Turn the computer right-side up, with the front toward you. 4. Disconnect the power connector cables 1 from the system board. 5. Release the power connector cables from the clips 2 and routing channel built into the top cover. 6. Disconnect the network cable 3 from the system board. 7. Release the network cable from the clips 4 and routing channel built into the top cover. 8. Remove the five slotted Torx T8M2.5×7.0 screws 1 and the Torx T8M2.5×6.0 screw 2 that secure the top cover to the base enclosure. Maintenance and Service Guide 4-37
Removal and replacement procedures
Maintenance and Service Guide
4–37
3. Turn the computer right-side up, with the front toward you.
4. Disconnect the power connector cables
1
from the system board.
5. Release the power connector cables from the clips
2
and routing channel built into the top cover.
6. Disconnect the network cable
3
from the system board.
7. Release the network cable from the clips
4
and routing channel built into the top cover.
8. Remove the five slotted Torx T8M2.5×7.0 screws
1
and the Torx T8M2.5×6.0 screw
2
that secure the top
cover to the base enclosure.