HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 67
to which the keyboard cable is attached, and then, disconnect the keyboard cable
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures 6. Lift the rear edge 1 of the keyboard until it rests at an angle. 7. Slide the keyboard 2 back until it rests on the switch cover and display. 8. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect the keyboard cable 2 from the system board. 4-22 Maintenance and Service Guide
4–22
Maintenance and Service Guide
Removal and replacement procedures
6. Lift the rear edge
1
of the keyboard until it rests at an angle.
7. Slide the keyboard
2
back until it rests on the switch cover and display.
8. Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and then
disconnect the keyboard cable
2
from the system board.