HP ProBook 4311s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Page 56
Remove the four Phillips PM3.0×4.0 screws, that secure the hard drive bracket to the hard drive.
View all HP ProBook 4311s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removal and replacement procedures 8. If it is necessary to replace the hard drive bracket or connector, follow these steps: a. Disconnect the hard drive connector 1 from the hard drive. b. Remove the four Phillips PM3.0×4.0 screws 2 that secure the hard drive bracket to the hard drive. c. Lift the bracket 3 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Maintenance and Service Guide 4-11
Removal and replacement procedures
Maintenance and Service Guide
4–11
8. If it is necessary to replace the hard drive bracket or connector, follow these steps:
a.
Disconnect the hard drive connector
1
from the hard drive.
b.
Remove the four Phillips PM3.0×4.0 screws
2
that secure the hard drive bracket to the hard drive.
c.
Lift the bracket
3
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.