HP ProDesk 400 G1 Micro Maintenance and Service Guide ProDesk 400 G1 Microtowe - Page 115
Drives, Connect an optical drive to the white SATA connector on the system board labeled SATA5.
View all HP ProDesk 400 G1 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Drives Description Optical drives DVD±RW drive DVD-ROM drive Blu-ray BD-RW SuperMulti XL Drive Hard drives 2 TB, 7200 rpm hard drive, 3.5 inch 1 TB hard drive, hybrid SSD 1 TB, 7200 rpm hard drive, 3.5 inch 500 GB, 7200 rpm hard drive, 3.5 inch 500 GB hard drive, hybrid SSD 256 GB Solid State Drive (SSD), self-encrypting (SED) 180 GB Solid State Drive (SSD) 128 GB Solid State Drive (SSD) 120 GB Solid State Drive (SSD) 20 GB Solid State Drive (SSD) Card reader 14-in-1, USB 3.0, 3.5-inch, UHS-I 15-in-1, USB 3.0, 3.5-inch, UHS-II Adapter, USB 3.0 to 2.0 Spare part number 657958-001 608394-001 719157-001 747993-001 724937-001 747992-001 751283-001 724938-001 680020-001 754076-001 665961-001 756459-001 683305-001 716390-001 736299-001 736835-001 When installing drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0. ● Connect a secondary hard drive to the light blue SATA connector on the system board labeled SATA1. ● Connect an optical drive to the white SATA connector on the system board labeled SATA5. ● Connect a media card reader USB 3.0 cable with a USB 3.0 to USB 2.0 adapter to the USB 2.0 connector on the system board labeled MEDIA. ● The power cable for the drives has two branches coming off the system board connector. The first branch is a dual-headed cable with the first connector (four-wire) routed to the 3.5-inch optional drive bay and the second connector (two-wire) routed to the slim optical drive bay. The second Drives 105