HP ProDesk 400 G1 Micro Maintenance and Service Guide ProDesk 400 G1 Microtowe - Page 82
replacing a hard drive, use the four 6-32 mounting screws that were removed from the old drive
View all HP ProDesk 400 G1 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
4. Slide the drive into the drive bay (1) and install the four 6-32 mounting screws (2) to secure the drive in place. NOTE: HP has supplied four extra 6-32 mounting screws on the front of the chassis behind the bezel. Refer to Drives on page 59 for an illustration of the extra mounting screws location. When replacing a hard drive, use the four 6-32 mounting screws that were removed from the old drive to install the new one. 72 Chapter 5 Removal and replacement procedures: Microtower
4.
Slide the drive into the drive bay (1) and install the four 6-32 mounting screws (2) to secure the
drive in place.
NOTE:
HP has supplied four extra 6-32 mounting screws on the front of the chassis behind the
bezel. Refer to
Drives
on page
59
for an illustration of the extra mounting screws location. When
replacing a hard drive, use the four 6-32 mounting screws that were removed from the old drive to
install the new one.
72
Chapter 5
Removal and replacement procedures: Microtower