HP ProDesk 400 G1 Micro Maintenance and Service Guide ProDesk 400 G1 Microtowe - Page 72
Drive positions, To verify the type and size of the storage devices installed in the computer
View all HP ProDesk 400 G1 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Drive positions 1 5.25-inch half-height drive bay (optical drive shown) 2 5.25-inch half-height drive bay 3 3.5-inch drive bay for optional drive (media card reader shown) 4 Primary 3.5-inch internal hard drive bay 5 Secondary 3.5-inch internal hard drive bay NOTE: The drive configuration on your computer may be different than the drive configuration shown above. To verify the type and size of the storage devices installed in the computer, run Computer Setup. 62 Chapter 5 Removal and replacement procedures: Microtower
Drive positions
1
5.25-inch half-height drive bay (optical drive shown)
2
5.25-inch half-height drive bay
3
3.5-inch drive bay for optional drive (media card reader shown)
4
Primary 3.5-inch internal hard drive bay
5
Secondary 3.5-inch internal hard drive bay
NOTE:
The drive configuration on your computer may be different than the drive configuration shown above.
To verify the type and size of the storage devices installed in the computer, run Computer Setup.
62
Chapter 5
Removal and replacement procedures: Microtower