HP ProDesk 400 G1 Micro Maintenance and Service Guide ProDesk 400 G1 Microtowe - Page 88
Power switch/LED assembly, Press down on the top of the assembly to disengage the tab
View all HP ProDesk 400 G1 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Power switch/LED assembly Description Power switch/LED assembly Spare part number 745050-001 1. Prepare the computer for disassembly (Preparation for disassembly on page 42). 2. Remove the access panel (Access panel on page 43). 3. Remove the front bezel (Front bezel on page 44). 4. Disconnect the cable from the system board connector labeled PB/LED. NOTE: System board appearance may vary. 5. Press down on the top of the assembly to disengage the tab (1) that secures the assembly to the chassis. 78 Chapter 5 Removal and replacement procedures: Microtower
Power switch/LED assembly
Description
Spare part number
Power switch/LED assembly
745050-001
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
42
).
2.
Remove the access panel (
Access panel
on page
43
).
3.
Remove the front bezel (
Front bezel
on page
44
).
4.
Disconnect the cable from the system board connector labeled PB/LED.
NOTE:
System board appearance may vary.
5.
Press down on the top of the assembly to disengage the tab
(1)
that secures the assembly to the
chassis.
78
Chapter 5
Removal and replacement procedures: Microtower