HP ProDesk 400 G1 Micro Maintenance and Service Guide ProDesk 400 G1 Microtowe - Page 206
PMM Deallocation Error during MEBx, Management Engine ME BIOS Extensions
View all HP ProDesk 400 G1 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Control panel message 2200-PMM Allocation Error during MEBx Download 2201-MEBx Module did not checksum correctly 2202-PMM Deallocation Error during MEBx cleanup 2203-Setup error during MEBx execution Description Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. MEBx selection or exit resulted in a setup failure. Recommended action 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the computer, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 196 Chapter 9 POST error messages