HP Professional sp750 Compaq Professional Workstation SP750 Hardware Reference - Page 22

Removing RIMMs, Installing a Memory Board, engaged with the card guide.

Get HP Professional sp750 PDF manuals and user guides View all HP Professional sp750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Removing RIMMs To remove a memory module from a RIMM slot, reverse the previous procedure. Installing a Memory Board To install a memory board: 1. Place the memory board into the memory board connector slot. When installing a memory board, press firmly on the board so that the whole connector seats properly in the memory board slot. ✎ After you install the memory board, make sure the board is engaged with the card guide. 2. Tighten the thumbscrew on the memory board metal slot cover. 3. Replace the workstation access panel. 4. Reconnect external devices. Plug the power cord back into the grounded AC outlet. Locating the memory board connector 1 on the system board 2-12 Hardware Upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
2-12
Hardware Upgrades
Compaq Confidential - Need to Know Required
Removing RIMMs
To remove a memory module from a RIMM slot, reverse the previous
procedure.
Installing a Memory Board
To install a memory board:
1.
Place the memory board into the memory board connector slot.
When installing a memory board, press firmly on the board so that
the whole connector seats properly in the memory board slot.
After you install the memory board, make sure the board is
engaged with the card guide.
2.
Tighten the thumbscrew on the memory board metal slot cover.
3.
Replace the workstation access panel.
4.
Reconnect external devices. Plug the power cord back into the
grounded AC outlet.
Locating the memory board connector
1
on the system board