HP Professional sp750 Compaq Professional Workstation SP750 Hardware Reference - Page 40

Installing and Removing an AGP Graphics Controller, To remove the AGP graphics controller

Get HP Professional sp750 PDF manuals and user guides View all HP Professional sp750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Installing and Removing an AGP Graphics Controller To install the AGP graphics controller, remove the metal slot screw and cover, insert the board into the AGP slot, and press the board firmly into place. Replace the metal slot screw. See “ Installing an Expansion Board” in this chapter for more information. To ensure the board fits properly, use an AGP graphics controller with an ATX format bracket. When installing an AGP board, press firmly on the board so that the whole connector seats properly in the AGP slot. If you are installing a full-length expansion board, be sure to engage the card guide. To remove the AGP graphics controller, remove the metal slot screw, hold the board at each end, and then pull up. Be sure to replace the metal slot screw and cover. See “ Removing an Expansion Board” in this chapter for more information. 2-30 Hardware Upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
2-30
Hardware Upgrades
Compaq Confidential - Need to Know Required
Installing and Removing an AGP Graphics Controller
To install the AGP graphics controller, remove the metal slot screw and
cover, insert the board into the AGP slot, and press the board firmly
into place. Replace the metal slot screw. See ² Installing an Expansion
Board³ in this chapter for more information.
To ensure the board fits properly, use an AGP graphics controller with
an ATX format bracket.
When installing an AGP board, press firmly on the board so that the
whole connector seats properly in the AGP slot. If you are installing a
full-length expansion board, be sure to engage the card guide.
To remove the AGP graphics controller, remove the metal slot screw,
hold the board at each end, and then pull up. Be sure to replace the
metal slot screw and cover. See ² Removing an Expansion Board³ in
this chapter for more information.