HP Professional sp750 Compaq Professional Workstation SP750 Hardware Reference - Page 28
Removing the Cooling Shield, Remove the workstation access panel and front bezel.
View all HP Professional sp750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removing the Cooling Shield A cooling shield covers bays 5 and 6 to provide proper cooling and EMI protection. The cooling shield must be removed before installing a hard drive in either of these bay locations. To remove a cooling shield: 1. Turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet and the back of the workstation. 3. Remove the workstation access panel and front bezel. 4. Refer to the following illustration to remove a cooling shield. Removing a cooling shield 5. Replace the shield after the drive is installed in the bay. To replace the cooling shield, reverse the above procedure. 2-18 Hardware Upgrades
2-18
Hardware Upgrades
Compaq Confidential - Need to Know Required
Removing the Cooling Shield
A cooling shield covers bays 5 and 6 to provide proper cooling and
EMI protection. The cooling shield must be removed before installing a
hard drive in either of these bay locations.
To remove a cooling shield:
1.
Turn off the workstation and any external devices.
2.
Disconnect the power cord from the grounded AC outlet and the
back of the workstation.
3.
Remove the workstation access panel and front bezel.
4.
Refer to the following illustration to remove a cooling shield.
Removing a cooling shield
5.
Replace the shield after the drive is installed in the bay.
To replace the cooling shield, reverse the above procedure.