HP Scitex FB500 HP Scitex FB500 and FB700 Printer Series - User Guide - Page 69

Remove the old UV lamp bulb,

Get HP Scitex FB500 PDF manuals and user guides View all HP Scitex FB500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Remove the old UV lamp bulb NOTE: Wear cotton gloves to protect the reflector and replacement bulb from fingerprints which would reduce bulb life and reflector efficiency. 1. Pull the spring-loaded clamp (A) from the side of the lamp reflector (B) as shown below. Figure 9-5 Spring-loaded clamp 2. Loosen the two screws that hold the two reflectors together until the outside reflector can be removed. Figure 9-6 Reflector screws 3. The reflector screws are captive screws and are not meant to be fully removed. If you do fully remove the screws, take care that the screws do not drop into the lamp housing. NOTE: Do not bend any of the tabs on the reflectors. ENWW Replace UV lamp bulb (500-1000 hours) 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Remove the old UV lamp bulb
NOTE:
Wear cotton gloves to protect the reflector and replacement bulb from fingerprints which
would reduce bulb life and reflector efficiency.
1.
Pull the spring-loaded clamp (A) from the side of the lamp reflector (B) as shown below.
Figure 9-5
Spring-loaded clamp
2.
Loosen the two screws that hold the two reflectors together until the outside reflector can be
removed.
Figure 9-6
Reflector screws
3.
The reflector screws are captive screws and are not meant to be fully removed. If you do fully
remove the screws, take care that the screws do not drop into the lamp housing.
NOTE:
Do not bend any of the tabs on the reflectors.
ENWW
Replace UV lamp bulb (500–1000 hours)
63