HP StoreOnce D2D4324 HP StoreOnce Backup System CLI Reference Guide (BB877-909 - Page 116

snmp show config Description of Command Function Displays information on the StoreOnce appliance's SNMP configuration. Command Syntax snmp show config Command Authority Administrator Command Object Requirements Not applicable - no objects exist within this command. Command Parameter Requirements Not applicable - no parameters exist within this command. Requirements for Command Execution The command entry must conform to the command syntax. Successful Command Output Upon successful completion of the command, the following is displayed: • A list of trap hosts consisting of: ◦ their fully qualified domain name or IP address ◦ their port ◦ their trap community string • The StoreOnce appliance's SNMP agent contact string (or blank if not defined). • The StoreOnce appliance's SNMP agent location string (or blank if not defined). • The StoreOnce appliance's SNMP agent ro community string. Command Operation during Abnormal Conditions • If any of the command elements (snmp, show, config) are misspelled, the following is displayed: element: command not found • If the command does not conform to the required syntax (for example, if any arguments are passed in the command entry), the following is displayed: Command Failed - the command does not conform to the required syntax, snmp show config Description: This command displays information on the backup system's snmp configuration. Example: snmp show config Examples # snmp show config SNMP V1/V2 Trapsinks Trapsink Address Version Port Community State ------- 16.78.5.182 1 162 public 16.78.5.181 1 162 public - displays snmp configuration ----on on 116 Alphabetical List of Commands and Details