HP StoreOnce D2D4324 HP StoreOnce Backup System CLI Reference Guide (BB877-909 - Page 37

hardware failover NOTE: This command applies to multi-node products only. Description of Command Function Forces the implementation of the high availability feature for the file server node defined within the command. When this command is executed, the backup node within the couplet takes over the service set functions originally residing on the defined node. Command Syntax hardware failover NODEX Command Authority Administrator Command Object Requirements NODEX - this object must appear in the command entry after hardware failover. NODEX is used to define an individual file server node. X is a unique numeric index. NODEX is a label uniquely defining the hardware component; it was assigned during the initial automatic hardware initialization and configuration and its value resides in the "node_config" file. A complete list of the NODEX labels can be obtained using the hardware show node status command (see "hardware show node status" (page 48)). Command Parameter Requirements Not applicable - no parameters exist within this command. Requirements for Command Execution • The command entry must conform to the command syntax. • The node to which failover will occur must be in a good state. Successful Command Output Upon successful completion of the command, the following is displayed: NODEX has successfully failed over, where NODEX is the file server node defined in the command entry. Command Operation during Abnormal Conditions If the command does not conform to the required syntax the following is displayed: Command Failed - the command does not conform to the required syntax, SYNTAX, where SYNTAX is the command syntax as described under Command Syntax in this section. Example # hardware failover node1 NODE1 has successfully failed over hardware failover 37