HP Tc2100 hp server tc2100 installation sheet (English) - Page 8
Installing the HP Server, Installing Options - server memory upgrade
View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 1 Setting Up the HP Server HP Server tc2100 NOS Installation Guide This document describes installation of the various supported NOSs, loading drivers, flashing BIOS, and using HP DiagTools to verify your HP Server's integrity. Installing the HP Server 5) If there are no options to install, skip to Step 7. If there are no optional HP accessories to install at this time, (do not install third party options until you have verified the HP Server's operation) skip to Step 7. 6) Installing Options and Accessories Install the optional HP mass storage devices, memory upgrades, or HP accessory boards at this time. Installing Options WARNING Before removing the cover, always disconnect the power cord and unplug telephone cables. Disconnect the power cord to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects such as tools or jewelry. Disconnect telephone cables to avoid exposure to shock hazard from telephone ringing voltages. The following upgrades (hard disk drives, memory (DIMMs), and PCI boards) require removing the cover from the HP Server tc2100. Ensure you disconnect power from the Server before opening it. BE SURE to observe appropriate ESD precautions when handling electronic components. 6a) If Installing Accessories, remove the covers • Installing options or upgrades in the Server requires access to the internal components of the Server, which requires removing the covers. • Refer to Chapter 3, "Opening and Closing the HP Server." 2