HP Tc2100 hp server tc2100 installation sheet (English) - Page 83

Clearing the CMOS Configuration, the Setup Utility.

Get HP Tc2100 - Server - 128 MB RAM PDF manuals and user guides View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Chapter 9 Troubleshooting NOTE Do not take removal/replacement actions until you have taken other troubleshooting steps. See the troubleshooting checklist. Clearing the CMOS Configuration You may need to clear the CMOS memory if the BIOS configuration has been corrupted, or if incorrect settings made in the Setup Utility have caused error messages to be unreadable. To clear the configuration: 1. Turn off power to the Server and remove the side cover. 2. Move jumper from its Normal position (Pins 1 & 2) on the system board to the Clear CMOS position (Pins 2 & 3). See Figures 9-1 and 9-2. 3. Turn on power to the Server. A message displays indicating the configuration has been cleared. 4. Turn off power to the Server. 5. Return the jumper on the system board to the Normal position (Pins 1 & 2). 6. Replace the side cover. 7. Turn on power to the Server and the following message displays: Incorrect System Configuration 8. Press to run the Setup Utility when appears. 9. Make any configuration changes required. 10. Choose the Exit option and save the changes to save the configuration and exit the Setup Utility. 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Chapter 9
Troubleshooting
77
NOTE
Do not take removal/replacement actions until you have taken
other troubleshooting steps. See the troubleshooting checklist.
Clearing the CMOS Configuration
You may need to clear the CMOS memory if the BIOS configuration has been
corrupted, or if incorrect settings made in the Setup Utility have caused error
messages to be unreadable.
To clear the configuration:
1. Turn off power to the Server and remove the side cover.
2. Move jumper from its Normal position (Pins 1 & 2) on the system board to
the Clear CMOS position (Pins 2 & 3). See Figures 9-1 and 9-2.
3. Turn on power to the Server.
A message displays indicating the configuration has been cleared.
4. Turn off power to the Server.
5. Return the jumper on the system board to the Normal position (Pins 1 & 2).
6. Replace the side cover.
7. Turn on power to the Server and the following message displays:
Incorrect System Configuration
8. Press
<F2>
to run the Setup Utility when
<
F2=Setup
>
appears.
9. Make any configuration changes required.
10. Choose the Exit option and save the changes to save the configuration and exit
the Setup Utility.