HP Tc2110 hp server tc2110 operation and maintenance guide (online version 1.1 - Page 35
Memory Modules, Tools Required, Memory Installation Guidelines
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3 Installing and Configuring Figure 3-11. Installing the Optional Backup Tape Drive Memory Modules The main memory for the HP Tower Server tc2110 is implemented using three memory slots on the system board and it supports up to 1.5 GB (512 MB x 3) of memory. The Server only supports HP 168-pin, PC 133 (133 MHz), 3.3V, unbuffered, ECC SDRAM DIMMs and ships with at least one 128 MB DIMM installed. NOTE Use only memory modules provided for your HP Server model. The use of other memory modules is not supported. Install only 128 MB, 256 MB, or 512 MB unbuffered ECC SDRAM modules. To ensure you have the correct DIMMs before installation, refer to one of the following for a list of qualified DIMMs: · HP Order Assistant on the HP web site at: http://www.hp.com/ · HP Customer Service Tools Required Use an anti-static service kit (3M 8501/8502/8503 or equivalent). This kit includes a static-dissipating work surface, a chassis clip lead, and a wrist strap. Memory Installation Guidelines The HP Server tc2110 uses PC 133 (133 MHz) unbuffered ECC SDRAM DIMMs, which are electrically different from the EDO and PC100 SDRAM memory modules used in previous HP Server models. · DIMMs sizes supported are 128 MB, 256 MB, or 512 MB in any combination. 29