HP Tc2110 hp server tc2110 operation and maintenance guide (online version 1.1 - Page 80

Mass Storage Devices, Removing the Flexible Disk Drive

Get HP Tc2110 - Server - 128 MB RAM PDF manuals and user guides View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Chapter 7 Mass Storage Devices Replacing Parts Figure 7-1. Mass Storage Device Locations Removing the Flexible Disk Drive 1. If the Server is operating, power down the Server, and if necessary, backup mass storage devices. Refer to Chapter 1, "Controls and Indicators" for instructions. 2. Disconnect the power cord and any external cables connected to the Server. If necessary, label each one to expedite re-assembly. 3. Remove the left side cover. 4. Remove the upper bezel. 5. At the rear of the flexible disk drive (FDD), carefully disconnect the power and data cables. 6. Remove the flexible disk drive: a. Press in on both release tabs to release the FDD assembly. b. Pull the FDD assembly out of the chassis. c. Remove the two screws from the side of the FDD assembly. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Chapter 7
Replacing Parts
Mass Storage Devices
Figure 7-1. Mass Storage Device Locations
Removing the Flexible Disk Drive
1.
If the Server is operating, power down the Server, and if necessary, backup mass storage devices.
Refer to Chapter 1, “Controls and Indicators” for instructions.
2.
Disconnect the power cord and any external cables connected to the Server.
If necessary, label each one to expedite re-assembly.
3. Remove the left side cover.
4. Remove the upper bezel.
5.
At the rear of the flexible disk drive (FDD), carefully disconnect the power and data cables.
6. Remove the flexible disk drive:
a.
Press in on both release tabs to release the FDD assembly.
b. Pull the FDD assembly out of the chassis.
c.
Remove the two screws from the side of the FDD assembly.
74