HP Tc2110 hp server tc2110 operation and maintenance guide (online version 1.1 - Page 46
Removing the Slot Cover, Inserting an Accessory Board
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 3 Installing and Configuring 8. Move the top of the desired slot cover away from the chassis and then lift it up and out of the chassis. See Figure 3-21. Figure 3-21. Removing the Slot Cover NOTE Ensure that you save the slot covers for use later to prevent EMI interference. 9. If you are installing an AGP card, open the latch located at the side of the slot. 10. Align the card carefully, slide it into position, and press it firmly into the slot. See Figure 3-22. Figure 3-22. Inserting an Accessory Board 11. If you are installing an AGP card, close the latch located at the side of the slot. 12. Replace the slot cover latch to secure the accessory board in the reverse order shown in Figure 3-20. The slot cover latch should snap in place. 40