HP Tc2110 hp server tc2110 operation and maintenance guide (online version 1.1 - Page 95

Slot Cover, Removing the Slot Cover, Inserting an Accessory Board

Get HP Tc2110 - Server - 128 MB RAM PDF manuals and user guides View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Chapter 7 Replacing Parts 3. Remove the slot cover latch by: a. Lifting up on the tab of slot cover latch with your finger. b. Raise the slot cover latch up away from the slot covers. c. Remove it from the chassis and keep it for reassembly later. You may need to lift the slot cover latch out of its retainer before lifting it out of the chassis to remove the slot cover latch. 4. Select the desired accessory slot cover, slide the top of the slot cover away from the chassis, and then lift it up and out of the chassis as shown in the following illustration. 5. Slide the accessory board into the desired PCI slot and then press down to seat the board. 6. Ensure the accessory board is seated properly in the PCI slot. Slot Cover Figure 7-15. Removing the Slot Cover Figure 7-16. Inserting an Accessory Board 7. Replace the slot cover latch to ensure the accessory board is held in place. 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Chapter 7
Replacing Parts
3.
Remove the slot cover latch by:
a.
Lifting up on the tab of slot cover latch with your finger.
b. Raise the slot cover latch up away from the slot covers.
c.
Remove it from the chassis and keep it for reassembly later.
You may need to lift the slot cover latch out of its retainer before lifting it out of the chassis to
remove the slot cover latch.
4.
Select the desired accessory slot cover, slide the top of the slot cover away from the chassis, and then lift
it up and out of the chassis as shown in the following illustration.
5.
Slide the accessory board into the desired PCI slot and then press down to seat the board.
6.
Ensure the accessory board is seated properly in the PCI slot.
Slot Cover
Figure 7-15. Removing the Slot Cover
Figure 7-16. Inserting an Accessory Board
7.
Replace the slot cover latch to ensure the accessory board is held in place.
89