HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 33
HP Setup Program, First, Turn On or Restart, Your PC, To Go to the HP, Summary Screen, Program - vectra manual
View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 Troubleshooting Your PC HP Setup Program HP Setup Program Follow these instructions to check your PC's configuration when you first use the PC: First, Turn On or Restart If your PC is off, turn on the display and then the PC. Your PC If the PC is already turned on, save your data, exit all programs and restart your PC. For Windows NT 4.0, Windows 95 or Windows 98, use the Shut Down - Restart your computer command in the Start menu. This command will automatically exit the operating system and restart the PC. For operating systems such as Windows NT 3.51, you must exit the operating system, then manually switch off and then on the PC. To Go to the HP Summary Screen While the Vectra logo appears on your display, press Esc. This will take you to the HP Summary Screen. The Summary Screen will appear for only a short time. To retain the screen indefinitely (until you decide to leave it), press the Pause key. The summary screen shows the basic configuration of your PC, such as the amount of main memory. To Go to the Setup Program To go immediately into the Setup program while the Vectra logo appears on your display (and bypass the Summary Screen), press F2 instead of Esc. The Setup program allows you to view and change the configuration of your PC, such as the passwords, standby (power saving) mode, IRQ settings and boot device order. 33