HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 34
Device Boot Order
View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
1 Troubleshooting Your PC HP Setup Program Device Boot Order Boot Menu for the Current Startup Only The current startup Boot menu gives the order of devices which the PC attempts to start or "boot" from (for example, the floppy drive first, the CD-ROM drive second, the hard disk drive third, and lastly the network). From this menu you can choose the device to boot from for the current startup. To Go to the Current To go to the current startup Boot menu while the Vectra logo appears Startup's Boot Menu on your display, press F8. Boot Menu for the Default Startup You can also enter the Setup program to change the boot order for all startups. To do this, go to the "Boot Device Priority" submenu of the Boot menu in the Setup program, accessed by pressing F2 at startup. Boot Menu for Hard Disk Drives In the Setup program, you can also select the hard disk drive to boot from if there is more than one hard disk drive installed. To do this, go to the "Hard Disk Drives" submenu of the Boot menu in the Setup program. NOTE If your PC comes with an IDE hard disk drive, it will by default boot from the hard disk drive when you first start your PC. 34