HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 49

To access the HP Summary Screen, press, Vectra, Setup, Diagnostics, & Recovery CD-ROM

Get HP VLi8 - Vectra PDF manuals and user guides View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

CAUTION 2 How to Install or Replace Accessories In Your PC Upgrading Mass Storage Devices Take care when handling the hard disk drive during installation. A one-quarter inch drop can damage it. 5 Slide the new hard drive into the drive tray (with correct orientation) and fasten the screws. 6 Replace the drive tray. 5 6 7 Attach all data and power connectors. 8 Replace the cover (described in this chapter). 9 Verify the new configuration by checking the HP Summary Screen. To access the HP Summary Screen, press Esc when the Vectra logo appears during startup. NOTE If you intend to boot from the newly installed drive, ensure that you have configured Setup to do this. Also ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating system and HP drivers, use the Diagnostics & Recovery CD-ROM provided with the PC. In addition, you can find the most up-to-date versions of HP drivers on HP's Web site at: www.hp.com/go/vectrasupport. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
49
2
How to Install or Replace Accessories In Your PC
Upgrading Mass Storage Devices
CAUTION
Take care when handling the hard disk drive during installation. A one-quarter
inch drop can damage it.
5
Slide the new hard drive into the drive tray (with correct
orientation) and fasten the screws.
6
Replace the drive tray.
7
Attach all data and power connectors.
8
Replace the cover (described in this chapter).
9
Verify the new configuration by checking the HP Summary Screen.
To access the HP Summary Screen, press
Esc
when the
Vectra
logo
appears during startup.
NOTE
If you intend to boot from the newly installed drive, ensure that you
have configured
Setup
to do this. Also ensure that you have installed all
the required operating system and HP drivers on the newly installed
drive. To reinstall operating system and HP drivers, use the
Diagnostics
& Recovery CD-ROM
provided with the PC. In addition, you can find
the most up-to-date versions of HP drivers on HP’s Web site at:
www.hp.com/go/vectrasupport
.
6
5