HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 45
Upgrading the Main Memory, or 256 MB non-ECC.
View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CAUTION 2 How to Install or Replace Accessories In Your PC Upgrading the Main Memory Upgrading the Main Memory Static electricity can damage electronic components. Turn all equipment OFF. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the PC while you are removing the accessory from the bag. Hold the accessory by the edges, being careful not to touch the components or connectors. Location of Main Memory - modules can be installed in either slot You can install up to a total of 512 MB 100 MHz SDRAM (two 256 MB modules). Main memory is available in modules of 32 MB, 64 MB, 128 or 256 MB non-ECC. 1 Remove the computer's cover (described in this chapter). 2 Insert the new memory module (aligning it) and close the two tabs. 3 Replace the cover (described in this chapter). 45