HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 69

With Celeron Processor, Even though the Celeron processor's speed settings are automatic

Get HP VLi8 - Vectra PDF manuals and user guides View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

With Celeron Processor 4 Technical Information System Board Switches Switch Switch function: 1 Reserved Do not use - OFF (default) 2 BIOS Crisis Recovery Should normally be kept in the OFF position. Used in case of power loss during BIOS update. Refer to flash.txt in the BIOS package downloadable from the HP Web site. 3 Keyboard power-on: ON = enabled (default) OFF = disabled 4 Clear Password: OFF = disabled (default) ON= enabled / clear User and Administrator passwords 5 Clear CMOS: OFF = normal (default) ON = clear CMOS and reload default values in Setup 6- 9 Processor speed, refer to the table on your PC's system board. Even though the Celeron processor's speed settings are automatic, HP recommends that you set the system board switches to the appropriate settings. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
69
4
Technical Information
System Board Switches
With Celeron Processor
Even though the Celeron processor’s speed settings are automatic,
HP recommends that you set the system board switches to the
appropriate settings.
Switch
Switch function:
1
Reserved
Do not use - OFF (default)
2
BIOS Crisis
Recovery
Should normally be kept in the OFF position. Used in case of
power loss during BIOS update. Refer to flash.txt in the BIOS
package downloadable from the HP Web site.
3
Keyboard
power-on:
ON = enabled (default)
OFF = disabled
4
Clear Password:
OFF = disabled (default)
ON= enabled / clear User and Administrator passwords
5
Clear CMOS:
OFF = normal (default)
ON = clear CMOS and reload default values in
Setup
6- 9
Processor speed, refer to the table on your PC’s system board.