HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 37
If the CD-ROM Drive Has a Problem, CD-ROM Drive Does Not Work, CD-ROM Drive is Idle
![]() |
View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
1 Troubleshooting Your PC More Troubleshooting for Drives If the CD-ROM Drive Has a Problem CD-ROM Drive Does Not Work 1 Check that all cables (data, power and audio) have been properly connected. 2 Check that a CD-ROM is inserted in the drive. 3 Check that the drive's lens is not dirty or damaged. • Verify that the drive is declared in the HP Setup program (Advanced Á IDE Devices), accessed by pressing F2 at startup. • Verify that the Local Bus IDE Adapter parameter is set to Both, IRQ 14/15 the HP Setup program (Advanced Á IDE Devices), accessed by pressing F2 at startup. 4 If you intend to boot from the CD-ROM drive, verify that: • Start From IDE CD-ROM is enabled in the HP Setup program (Security Á Boot Devices Security), accessed by pressing F2 at startup. • ATAPI CD-ROM is placed before Hard Drive in the HP Setup program (Boot Á Boot Device Priority) accessed by pressing F2 at startup. • Removable Media is prioritized after pressing F8 at startup. 5 For further information refer to the manual supplied with the drive. CD-ROM Drive is Idle If the CD-ROM drive does not appear to be working, try accessing the disk by clicking on the CD-ROM drive icon or drive letter assigned to the CD-ROM drive by your operating system. 37
![](/manual_guide/products/hewlettpackard-vli8-hp-vectra-vli8-sf-troubleshooting-upgrade-guide-1498a29/37.png)