HP VLi8 HP Vectra VLi8 SF, Troubleshooting and Upgrade Guide - Page 54
Installing Accessory Boards, Accessory Board Slots
View all HP VLi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2 How to Install or Replace Accessories In Your PC Installing Accessory Boards NOTE Installing Accessory Boards Accessory Board Slots The PC has two accessory board slots. Only use XT format accessory boards (width less than 10.4 cm or 4.09 inches) that are less than 17.6 cm (6.9-inches) in length. Accessory Board Connectors Physical Slot 1 Physical Slot 2 Physical Slot 3 PCI Slot # 2 PCI Slot # 3 (combo) ISA Slot # 1 (combo) CAUTION • PCI slot #2 (the top slot) can be used for a standard length (less than 17.6 cm or 6.9-inches long) XT format 32-bit PCI board. • PCI slot #3 can be used for a standard length (less than 17.6 cm or 6.9-inches long) XT format 32-bit PCI board, or • ISA slot #1 can be used for a half-length XT format 16-bit ISA board. When installing an accessory board in physical slot 3, ensure you do not bend the accessory board slot's connector pins. To avoid this, partly remove the system board before installing the accessory board. 54