HP Vectra XM 5/xxx HP Vectra XM 5/xxx Series 3 - User Guide - Page 85
If Your PC Has a Software Problem
View all HP Vectra XM 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4 Troubleshooting Your PC and Using the SETUP Program If Your PC Has a Software Problem If Your PC Has a Software Problem If You Have Forgotten Your Password Ì If you forget the User Password and the System Administrator Password is set and known: 1 Restart the PC. If the keyboard is locked, unplug the power cord and plug it in again. 2 Wait for the message . 3 Press to start SETUP. 4 Type the System Administrator Password to enter SETUP. 5 Highlight the User Password field and set a new User Password. 6 Press to save the new User Password and exit SETUP. Ì If you forget both the User Password and the System Administrator Password: 1 Switch off the PC. 2 Remove the computer's cover (refer to chapter 3). 3 Set switch 4 (PSWRD) on the system board switch block to ON (refer to chapter 5 for the switch location). 4 Switch on the PC and allow it to complete its startup routine. 5 Switch off the computer. 6 Reset switch 4 (PSWRD) to OFF. 7 Replace the computer's cover (refer to chapter 3). 8 Switch on the PC and allow it to complete its startup routine. 9 After the Power-On Self-Test has completed, press prompted to use SETUP. when 10 Set new User and System Administrator Passwords. 11 Press to save the new passwords and exit SETUP. English 73