HP XM600 hp kayak xm600 series 1, user's guide for desktop models - Page 25
Removing and Replacing a Processor, Remove a Processor, Install a Second Processor
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation Removing and Replacing a Processor Removing and Replacing a Processor Single-processor systems can be upgraded to dual-processor systems by installing a second processor in the vacant processor slot. The second processor must be of the same type, speed and level-2 cache memory capacity as the first. 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 22 for instructions). 3 Remove the HP UltraFlow Airflow Guide (refer to page 24 for instructions). 4 If you intend to: a Remove a Processor: Press the retention clips on both sides of the processor outwards. Then gently lift the processor upwards from the processor connector, taking care not to tilt it too much. b Install a Second Processor: Remove the processor terminator from the CPU 2 connector. Store the terminator in a safe place. For information about upgrading the operating system, refer to "HP DualExpress!", on page 26. 25