HP Xw4200 Getting Started Guide HP Workstations xw4100, xw4200, xw6200, and xw - Page 49
Reseat DIMMs. Power, For systems with a graphics - video card
UPC - 829160426853
View all HP Xw4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Troubleshooting Activity Red Power LED blinks five times, once every second, followed by a two second pause. Red Power LED blinks six times, once every second, followed by a two second pause. Red Power LED blinks seven times, once every second, followed by a two second pause. Beeps 5 6 7 Possible Cause Pre-video memory error Pre-video graphics error. System board failure (ROM detected failure prior to video). Recommended Action 1. Reseat DIMMs. Power on the system. 2. Replace DIMMs one at a time to isolate faulty module. 3. Replace third-party memory with HP memory. 4. Replace the system board. For systems with a graphics card: 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card. 3. Replace the system board. Replace the system board. Getting Started Guide www.hp.com 4-15