HP rp7405 User Guide, Third Edition - hp rp7405/rp7410 Servers - Page 101
Removing and Replacing the PCI Voltage Regulator Modules, Removing PCI VRM
View all HP rp7405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Removal and Replacement Removing and Replacing the PCI Voltage Regulator Modules Removing and Replacing the PCI Voltage Regulator Modules Removing PCI VRM Step 1. Power down server. IMPORTANT Power must be removed from both PCI Chassis 0 and PCI Chassis 1 to continue. Step 2. Remove right side cover. Step 3. Remove PCI side panel. Step 4. Identify VRM to be replaced (O or 1). Step 5. Unscrew VRM from bracket (2 screws on non-component side). Step 6. Lift up and gently pull from the socket. Figure 4-18 Locating the VRMs on PCI Backplane VRM 1 VRM 0 Replacing the PCI VRM Step 1. Firmly seat the VRM into the socket being careful not to bend pins. Step 2. Attach bracket to VRM using 2 screws removed earlier. Step 3. Put PCI side panel back onto chassis. Chapter 4 79