HP rp7405 User Guide, Third Edition - hp rp7405/rp7410 Servers - Page 67
Selecting a Boot Partition using the Management Processor,
View all HP rp7405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installation Selecting a Boot Partition using the Management Processor Selecting a Boot Partition using the Management Processor At this point in the installation process, the hardware is set up, the Management Processor (MP) is connected to the LAN, the AC and DC power have been turned on, and the selftest is completed. Now the configuration can be verified. After DC is powered on and the selftest is complete, use the MP to select a boot partition. 1. From the MP Main Menu, enter cm. 2. From the MP Command Menu, enter bo. 3. Select the partition to boot. Partitions may be booted in any order. 4. Return to the MP Main menu by typing ma from the MP Command menu 5. Exit the MP by typing co at the MP Main Menu. Exiting the MP should automatically bring you to the Boot Console Handler Main menu. Chapter 2 45