HP rp7405 User Guide, Third Edition - hp rp7405/rp7410 Servers - Page 56
connecting AC, Power Cord Configuration, Power Cord Configuration
View all HP rp7405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installation Connecting AC Input Power Connecting AC Input Power The hp rp7405/rp7410 has five line cord configurations: • All four line cords • Cords A0 and A1 only • Cords B0 and B1 only • Cords A0 and B0 only • Cords A1 and B1 only A single-line-cord configuration is not allowed. Figure 2-20 Power Cord Configuration A0 A1 B0 B1 The power cord configuration is passed to the operating system using the pwrgrd (Power Grid) command. Each of the five selections in the pwrgrd command matches one of the configurations. The appropriate option should be selected for the actual line cord configuration. With the correct configuration selected, the LEDs should be green. when the pwrgrd command is invoked, the following menu is displayed. IMPORTANT Options 1 and 2 are for Hewlett-Packard internal use only. Do not select these options. prompt> pwrgrd Power grid configuration preference. 1. Grid A only (Cords A0,A1 required) 2. Grid B only (Cords B0,B1 required) 3. Grids A & B (Cords A0,A1,B0,B1 required) 4. Cords A0 & B0 only 5. Cords A1 & B1 only Select Option: 34 Chapter 2