HP rp7405 User Guide, Third Edition - hp rp7405/rp7410 Servers - Page 75
System, Standby, and I/O Fan LEDs, <TABLE>, SINC POST LEDs, Driven By, State, Description
View all HP rp7405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Troubleshooting Common Installation Problems Table 3-3 LED Fault PCI Power Supply LEDs (Continued) Driven By State Description Each Supply Flash Yellow On Yellow Flash Red On Red Off The temperature within the power supply is above the lower threshold. The temperature of the power supply is approaching the thermal limit Power supply has shut down due to an over temperature condition, a failure to regulate the power within expected limits, or a current-limit condition. Not Used No Faults System, Standby, and I/O Fan LEDs There is a single three-color LED on each System, Standby, and I/O Fan. Table 3-4 System, Standby, and I/O Fan LEDs LED Driven By State Description Fan Status Fan On Green Normal Flash Yellow Predictive Failure Flash Red Failed Off No Power SINC POST LEDs The four SINC POST LEDs (Green) display the current state of the SINC firmware. Table 3-5 SINC POST LEDs LED SINC POST Driven By State SINC Off All On 0x1-0xE Description 3.3V SB Off SINC is reset or dead SINC POST State Chapter 3 53