HP rp7405 User Guide, Third Edition - hp rp7405/rp7410 Servers - Page 61
Front Panel Display, Standby Power, MP Present, Attention
View all HP rp7405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Installation MP Core I/O Connections On the front of the hp rp7405/rp7410, a solid green Standby Power, a solid green MP Present, and a flashing amber Attention light will illuminate after about 30 seconds. Figure 2-22 Front Panel Display 2. Check the bulk power supply LED for each BPS. When on, the breakers distribute power to the BPSs. AC power is present at the BPSs: • When power is first applied. Note the BPS LEDs will be flashing amber. • After 30 seconds has elapsed. Note the flashing amber BPS LED for each BPS becomes a flashing green LED Refer to power cord policies to interpret LED indicators. 3. Login to the MP: a. Enter Admin at the login prompt. This term is case sensitive. It takes a few moments for the MP prompt to appear. If it does not, make sure the laptop serial device settings are correct: 8 bits, no parity, 9600 baud, and na for both Receive and Transmit. Then, try again. b. Enter Admin at the password prompt. This term is case sensitive. Chapter 2 39