IBM 8658 User Guide

IBM 8658 - Eserver xSeries 230 Manual

Get IBM 8658 - Eserver xSeries 230 PDF manuals and user guides
UPC - 087944602644
View all IBM 8658 manuals
Add to My Manuals
Save this manual to your list of manuals

IBM 8658 manual content summary:

  • IBM 8658 | User Guide - Page 1
    Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY S10K-2615-00
  • IBM 8658 | User Guide - Page 2
  • IBM 8658 | User Guide - Page 3
    Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY S10K-2615-00
  • IBM 8658 | User Guide - Page 4
    Note: Before using this information and the product it supports, be sure to read the general information under " . This publication was developed for products and services offered in the United States of America. IBM may not offer the products, services, or features discussed in this document in
  • IBM 8658 | User Guide - Page 5
    information for the Netfinity 5100 server. Important: This manual is intended for trained servicers who are familiar with IBM PC Server products. Important safety information Be sure to read all caution and danger statements in this book before performing any of the instructions. Leia todas as
  • IBM 8658 | User Guide - Page 6
    The HMM manuals online address is: http://www.us.pc.ibm.com/cdt/hmm.html The IBM PC Company Support Page is: http://www.us.pc.ibm.com/support/index.html The IBM PC Company Home Page is: http://www.pc.ibm.com iv : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 7
    About this manual iii Important safety information iii Online Support iv IBM Online Addresses iv General checkout 1 General information 3 Features and specifications 3 What your IBM Netfinity 5100 offers 5 Reliability, availability, and serviceability features . . 6 Server controls and
  • IBM 8658 | User Guide - Page 8
    messages 145 Undetermined Problems 145 Parts listing (Type 8658 147 Keyboards 149 Power cords 150 Related service information . . . . . 151 Safety information 152 General safety 152 Electrical safety 152 vi : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 9
    Safety inspection guide 154 Handling electrostatic discharge-sensitive devices 155 Grounding requirements 155 Safety notices (multi-lingual translations) . . . 155 Send us your comments 185 Problem determination tips 185 Notices 186 Trademarks 186 Contents vii
  • IBM 8658 | User Guide - Page 10
    viii : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 11
    server: the system board, Ethernet controller, video controller, RAM the diagnostic programs, a single problem might cause several error messages , go to "Undetermined Problems" on page 145. 5. Power supply problems, see "Power supply on page 152. 7. For intermittent problems, check the error log; see
  • IBM 8658 | User Guide - Page 12
    on page 16. v Check for the following responses: a. One beep. b. Readable instructions or the Main Menu. 3. DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES? NO a problem, see "Undetermined Problems" on page 145. 2 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 13
    data storage. Your IBM Netfinity 5100 server comes with a three-year limited warranty and IBM Netfinity/PC Server 90-Day Start Up Support. If you have access to the World Wide Web, you can obtain up-to-date information about your Netfinity 5100 model and other IBM server products at the following
  • IBM 8658 | User Guide - Page 14
    to 2133 m (6998.0 ft.) - Server off: 10║ to 43║ C (50.0║ to 109.4║ F). Maximum altitude: 2133 m (6998.0 ft.) v Humidity: - Server on: 8% to 80% - Server off: 8% to 80% Heat output: Sine-wave input (50-60 Hz) required 4 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 15
    IBM Netfinity 5100 offers The unique design of your server takes advantage of advancements in symmetric multiprocessing (SMP), data storage, Your server combines: v Impressive performance using an innovative approach to SMP Your server supports your server is less than 250 watts and a problem occurs
  • IBM 8658 | User Guide - Page 16
    startup v Hot-swap hard drive bays v Error codes and messages v System error logging v Upgradable BIOS, diagnostics, and Netfinity Advanced System Management Processor code v Automatic restart after a power failure 6 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 17
    , power backplane, SCSI backplane, and each power supply. v Operator information panel v Diagnostic LEDs on the system board v Remote Connect Server controls and indicators 1 Operator information panel 2 Hard disk drive activity light 3 Hard disk drive status light 4 Serial number 5 Cover
  • IBM 8658 | User Guide - Page 18
    POST). Operator Information Panel: The lights on this panel give status information for your server. See "Operator Information panel" on page 11 for more information. Hard Disk controller is accessing the drive. 8 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 19
    automatically when power is restored. v Pressing the Reset button resets the server and runs the power-on self-test. v The server can also be powered on by the Netfinity Advanced System Management Processor. Deactivating the server The server can be deactivated as follows: General information 9
  • IBM 8658 | User Guide - Page 20
    off all power to the server. Note: Wait about 15 seconds after disconnecting the power cords for your system to stop running. Watch for the System Power light on the operator information panel to stop blinking. 10 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 21
    , the power cord is not connected, the power supply has failed, or this LED has failed. POST complete light This green LED lights when the server completes the power-on self-test (POST) without any errors. SCSI Hard Disk Drive In-use Light: This green LED lights when there is activity
  • IBM 8658 | User Guide - Page 22
    Ethernet Transmit/Receive Activity Light: This green LED lights when there is transmit or receive activity to or from the server. 12 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 23
    Diagnostics This section provides basic troubleshooting information to help you resolve some common problems that might occur with your server. Diagnostic tools overview The following tools are available to help you identify and resolve hardware-related problems: v POST beep codes, error messages,
  • IBM 8658 | User Guide - Page 24
    the power supplies can supply +5V dc current to the server. This feature helps you isolate the problem if an error causes the server to shut down. See "Light path diagnostics table" on 15 below for information on 14 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 25
    error messages indicate that a problem exists; they are not intended to be used to identify a failing part. Sometimes the first error to occur causes additional errors. In this case, the server displays more than one error message. Always follow the suggested action instructions for the first error
  • IBM 8658 | User Guide - Page 26
    Specific String This is additional information that you can use to analyze the problem the server and watch the screen. Note: To run the diagnostic programs, you must start the server instructions on the screen. 16 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 27
    it. Type in the appropriate password; then, press Enter. 3. When the Diagnostic Programs screen appears, select Utility from the top of the screen. 4. Select View Test Log from the list that appears; then, follow the instructions on the screen. The system maintains the test-log data while the server
  • IBM 8658 | User Guide - Page 28
    Restart the server. The system should start up normally. Troubleshooting the Ethernet controller This section provides troubleshooting information for problems that might occur contains an X, the hub has an X port. 18 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 29
    is 100 Mbps. v Make sure that you are using the correct device drivers, supplied with your server. v Check for operating system-specific causes for the problem. v Make sure that the device drivers on the client and server are using the same protocol. v Test the Ethernet controller. How you test
  • IBM 8658 | User Guide - Page 30
    the driver tried to initialize it. Action: Verify that the Ethernet controller is enabled. If the Ethernet controller is enabled, go to "Starting the diagnostic programs" on page 16 to run the diagnostic programs. 20 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 31
    adapter could not be found. Explanation: You tried to load another instance of the driver with a different I/O address. This new adapter could not be found. Action: Verify that you installed an IBM Netfinity 10/100 Fault Tolerant Adapter and make sure that the adapter is seated correctly. PCNTNW
  • IBM 8658 | User Guide - Page 32
    only. Network driver interface specification 2.01 (OS/2) driver messages This section provides explanations of the error messages for the NDIS 2.01 (OS/2) drivers, and suggested actions to resolve each problem. 22 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 33
    stack is not configured correctly. Action: Check and correct your configuration. PCNTND-15 Device not found. Explanation: The driver cannot find an Ethernet controller in the server. Action: Verify that the Ethernet controller is enabled. If the Ethernet controller is enabled, go to "Starting the
  • IBM 8658 | User Guide - Page 34
    NT) driver messages for the Ethernet controller PermaNet™Server: No Secondary Adapter Found. Grouping Mode is disabled. PermaNet Server: UNIX LLI driver, and suggested actions to resolve each problem. 24 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 35
    adapter that fails to respond. If the problem persists, run the diagnostic programs. Device fault...Reset initiated! pnt0-19 Explanation: The SunSoft Solaris driver has been reset due to a device fault. Action: Verify that additional IBM Netfinity 10/100 Fault Tolerant Adapters are present or
  • IBM 8658 | User Guide - Page 36
    assigned I/O address specified for the Ethernet controller Power checkout Power problems can be difficult to troubleshoot. For instance, a short circuit can exist anywhere on a short circuit on a circuit board. 26 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 37
    (see page 145). For specific problems, see "Power error messages" on page 142. Replacing the battery IBM has designed this product with handling and installation instructions supplied with the replacement battery. Note: After you replace the battery, you must reconfigure your server and reset the
  • IBM 8658 | User Guide - Page 38
    is at least 50 mm (2 inches) of ventilated space at the sides of the server and 100 mm (4 inches) at the rear of the server v The top cover is removed for no longer than 30 minutes while the server is operating 28 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 39
    server is operating v A removed hot-swap drive is replaced within two minutes of removal v Cables for optional adapters are routed according to the instructions specifications for the system are met. See "Features and specifications" on page 3. For more information on specific temperature
  • IBM 8658 | User Guide - Page 40
    30 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 41
    with your server. You specifically designed for IBM Netfinity servers. You can use these CDs during the initial installation of your server to configure the server server models that have a ServeRAID adapter preinstalled. If your server instructions Turn on the server and watch the the instructions that
  • IBM 8658 | User Guide - Page 42
    following: IBM Netfinity Setup - © IBM Corporation 1998 Configuration/Setup Utility • choice to view system information, such as the machine type and model, the server serial number, and the revision level or issue : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 43
    Select this choice to set the system date and time and to change the system time sent to the Advanced System Management Processor (service processor) when the server is started. This choice appears only on the full Configuration/Setup Utility main menu. The system time is in a 24-hour format: hour:
  • IBM 8658 | User Guide - Page 44
    the instructions on so by an IBM authorized service representative. - server can automatically disable the failing memory bank and continue operating with reduced memory capacity. If this occurs, you must manually 34 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 45
    problem is corrected. Select Memory Settings from the Advanced Setup menu, use the arrow keys to highlight the bank that you want to enable; then, use the arrow keys to select Enable. v System Service power-on password, you can regain access to the server through one of the following methods: v If an
  • IBM 8658 | User Guide - Page 46
    override switch (switch 8 on switch block 1 on the system board) to ON. 4. Install the server cover (see "Installing the cover" on page 70) and connect all external cables and power cords. replace the system board. 36 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 47
    password features. Table 6. Power-on and administrator password features Type of password Results Power-on password v Enter the password to sections provide the instructions needed to start the SCSISelect Utility and descriptions of the menu choices available. Note: If your server has a RAID
  • IBM 8658 | User Guide - Page 48
    to its default values, press F6; then, follow the instructions that appear on the screen. You can view or change These options include enabling support for large hard disk drives and support for drives with UltraSCSI Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 49
    Format Disk; then, follow the instructions on the screen. Note: Hard disks normally contain more tracks than their stated capacity (to allow for defective tracks). A message appears on the screen if the defect limit is reached. If this happens, have the system serviced. Configuring the server 39
  • IBM 8658 | User Guide - Page 50
    40 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 51
    to help you add options to your server. Some option-removal instructions are provided, in case you need to remove one option to install another. Exploded view of the Netfinity 5100 server The orange color on components and labels in your server identifies hot-swap or hot-plug components
  • IBM 8658 | User Guide - Page 52
    slot 5 64-bit (J44) 10 Battery 11 PCI slot 4 64-bit (J39) 12 PCI slot 3 64-bit (J34) 13 PCI slot 2 32-bit (J32) 42 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 53
    System board internal cable connectors The following illustration identifies system-board connectors for internal cables. 1 Fan 3 (J35) 2 Main Power (J4) 3 Power (J51) 4 DASD (SCSI) system management (J5) 5 Power system management (J12) 6 Fan 1 (J59) 7 Operator information panel (J50)
  • IBM 8658 | User Guide - Page 54
    . 3 Microprocessor speed setting (requires switches 1-4). See Table 8 on page 45 for specific settings. 4 Microprocessor speed setting (requires switches 1-4). SeeTable 8 on page 45 for specific settings. 44 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 55
    to change the speed settings. System board LED locations The following illustration identifies system-board LEDs. You may need to refer to this figure when troubleshooting a problem. 1 Secondary microprocessor failure (CR7) Installing options 45
  • IBM 8658 | User Guide - Page 56
    with your server or options. v You do not need to turn off the server to support this function. For complete details about installing or removing a hot-swap component, see the information provided in this chapter. 46 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 57
    a list of supported options for your server, refer to http://www.ibm.com/pc/us server. - On a rack model, refer to the documentation that comes with the rack. v A removed hot-swap drive is replaced within two minutes of removal. v Cables for optional adapters are routed according to the instructions
  • IBM 8658 | User Guide - Page 58
    on it. v Do not place the option on the server's covers or any metal surface. Removing the cover, door, and bezel The following sections describe how to remove the cover, the door (for tower models), and the bezel. 48 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 59
    : For proper cooling and airflow, replace the cover before turning on the server. Operating the server for extended periods of time (over 30 minutes) with the cover removed might damage server components. Removing the cover (rack model) Note: To remove or install a hot-swap hard disk drive or hot
  • IBM 8658 | User Guide - Page 60
    server components. Removing the server door (tower model) 1 Release tab 2 Door 3 Flange To remove the server door: 1. Unlock and open the server door. 2. Locate the flange on the top edge of the door. 50 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 61
    the blue bezel-release lever, following the curve of the lever opening. Note: The illustration shows a rack model. 2. Lift the bezel tabs out of the slots and pull the bezel away from the server front. Store the bezel in a safe place. Working with adapters You can install up to five peripheral
  • IBM 8658 | User Guide - Page 62
    that comes with the adapter and follow those instructions in addition to the instructions given in this chapter. If you need to server" on page 31 for details on using the Configuration/Setup Utility program. 52 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 63
    adapter. Note: Check the instructions that come with the adapter for any requirements or restrictions. 4. Remove the expansion-slot cover: a. Press the arrow on the adapter-retention bracket release tab and remove the bracket. b. Slide the expansion-slot cover out of the server. Store it in a safe
  • IBM 8658 | User Guide - Page 64
    server, as shown in the following illustrations. Attention: If you are going to install additional drives in the non-hot-swap bays, you must install the power supply backplane option and additional power supplies. 54 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 65
    Tower model 1 Non-hot-swap bay D 2 SCSI ID 0 3 Hard disk activity light 4 Hard disk status light 5 SCSI ID 2 6 SCSI ID 3 7 SCSI ID 4 8 SCSI ID 8 9 SCSI ID 9 10 Hot swap bays 11 Non-hot-swap bay C 12 Non-hot-swap bay B 13 Non-hot-swap bay A Installing options 55
  • IBM 8658 | User Guide - Page 66
    Hot-swap-drive trays come with the hot-swap drives. v Your server supports six slim (1-inch) or three half-high (1.6-inch), 3.5-inch hot- server first. Non-hot-swap drives are installed in bays A, B, C, and D only. 56 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 67
    CD-ROM drive in bay C. v The Netfinity 5100 server supports only one diskette drive. v The diskette drive converter, contact your IBM reseller or IBM marketing representative. Note: The server's EMI integrity and want to install the drive. 3. Check the instructions that come with the drive to see if
  • IBM 8658 | User Guide - Page 68
    drive/tray assembly with the guide rails in the drive server to remove or install the hot-swap drives. Attention: 1. Before you remove a hot-swap hard disk drive that is not defective, back up all important data. 58 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 69
    adapter for further details. Refer to the following illustration of the tower model while you perform the steps in this procedure. 1 Filler panel for If your server is a tower model, unlock and open the server door. Attention: To maintain proper system cooling, do not operate the server for more
  • IBM 8658 | User Guide - Page 70
    Align the rails on the drive/tray assembly with the guide rails in the drive bay. c. Gently push the drive that the hard disk drive is installed properly (see "Server controls and indicators" on page 7 for the location Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 71
    static-protective bag containing the drive to any unpainted metal surface on the server; then, remove the drive from the bag and place it on a static optional power supply backplane kit. 7. Align the rails on the drive with the guide rails in the drive bay. 8. Push the drive into the bay until it
  • IBM 8658 | User Guide - Page 72
    2. Your Netfinity 5100 server supports 128 MB, 256 MB, 512 MB, and 1 GB DIMMs. Your server supports a minimum of and select Save Settings. See "Configuring the server" on page 31 for more information. 1 DIMM 2 2 DIMM Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 73
    server comes with one microprocessor installed server can operate as a symmetric multiprocessing (SMP) server server is available through the World Wide Web. 2. Obtain an SMP-capable operating system (optional). For a list of supported operating systems, see http://www.ibm proper server operation when
  • IBM 8658 | User Guide - Page 74
    1. Review the information in"Before you begin" on page 46. 2. Turn off the server and peripheral devices and disconnect all external cables and power cords; then remove the cover ( connector and to remove the VRM. 64 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 75
    have other options to install or remove, do so now; otherwise, go to "Installing the cover" on page 70. Installing or removing a power supply Your server comes with one power supply. You can replace the power supply backplane with an optional backplane that will enable you to add a second and third
  • IBM 8658 | User Guide - Page 76
    it becomes power supply 2. Power supply bay 3 Your server comes with power supply 3 installed. AC power LED serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 77
    : You do not need to turn off the power to the server to install hot-swap power supplies. 1 Power supply backplane option inserting your finger into the depression on the filler panel and pulling it away from the server. Save the filler panel in case you remove the power supply at a later time.
  • IBM 8658 | User Guide - Page 78
    server and peripheral devices. 2. Remove the power supply: a. Unplug the power cord from the power supply. Attention: Be careful when you remove the power supply; the power supply might be too hot to handle comfortably. 68 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY
  • IBM 8658 | User Guide - Page 79
    you have other options to install or remove, do so now; otherwise, go to "Installing the cover" on page 70. Replacing a fan assembly Your server comes with two fan assemblies. Attention: Replace a fan that has failed within 48 hours to help ensure proper cooling. The following illustration shows the
  • IBM 8658 | User Guide - Page 80
    . 2. Insert the tabs at the top of the cover into the slots at the top of the server. 3. Hold the cover against the server and slide the cover toward the front of the server until the cover clicks into place. 70 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 81
    tabs at the bottom edge of the bezel in the slots at the bottom front of the server. 2. Press the top of the bezel toward the server until the bezel clicks into place. To install the server door: 1. Set the door on the bottom hinge. 2. Press the flange downward while pressing the top
  • IBM 8658 | User Guide - Page 82
    the documentation that comes with your options. 2. Turn off the server and all attached devices. 3. Follow the instructions that come with the option to prepare it for installation and to connect it to the server. 72 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 83
    Serial ARS-485 peer-to-peer management knockout Input/Output ports This section provides information about the input/output (I/O) ports on your server. These ports include the following: v One parallel port v One video port v Two Ultra3 SCSI ports v One keyboard port v One auxiliary pointing device
  • IBM 8658 | User Guide - Page 84
    mode, the server supports the ECP and EPP modes. To view or change the parallel-port assignment: 1. Restart the server and watch I/O Data 6 EPP Signal -WRITE Data 0 Data 1 Data 2 Data 3 Data 4 Data 5 Data 6 74 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 85
    ports Your server has two standard serial ports: Serial port A and Serial port B. The operating system can use and share both serial ports; however, the integrated Netfinity Advanced System Management Processor can use and share only Serial port A. Some application programs require specific ports
  • IBM 8658 | User Guide - Page 86
    The following table shows the pin-number assignments for the USB-port connectors on the rear of your server. Table 13. USB-port connector pin-number assignments Pin Signal 1 VCC 2 -Data 3 +Data 4 Ground 76 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 87
    device) port The system board has one auxiliary-device port that supports a mouse or other pointing device. The following table shows the pin -number assignments for the auxiliary-device connector on the rear of your server. 6 4 2 5 3 1 Table 15. Auxiliary-device connector pin-number
  • IBM 8658 | User Guide - Page 88
    SDL SCSI ports Your server has an integrated dual-channel Ultra3 small computer system interface (SCSI) controller. This controller supports two independent Ultra 160/m channel connector on the RAID adapter. 78 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 89
    IBM marketing representative. For information about the maximum length of SCSI cable between the terminated ends of the cable, refer to the ANSI SCSI standards. Adhering to these standards will help ensure that your server that is provided with the device for instructions to set its SCSI ID. SCSI
  • IBM 8658 | User Guide - Page 90
    Input/Output 31 +Data 8 controller supports half IBM Netfinity 10/100 Fault Tolerant Adapter is an optional redundant network interface card (NIC adapter) that you can install in your server. If you install this 80 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 91
    or manually IBM Netfinity 10/100 Fault Tolerant Adapters that you can install in your server supported by OS/2™, Windows NT Server, and IntraNetWare. The setup required for each operating system follows. IBM Operating System/2 (OS/2): 1. Add the redundant NIC adapter according to the instructions
  • IBM 8658 | User Guide - Page 92
    Plug Services EXE file from the Netfinity Support web page and extract the files onto a diskette. 2. Log on to Windows NT Server as a user in the Administrator group. 3. Insert the diskette into the diskette drive. 82 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 93
    the Run option. 5. Type A:\SETUP.EXE in the Open box. 6. Click OK. The Setup wizard opens. 7. Follow the instructions given by the setup wizard until the program is installed. Windows NT Server failover setup: To install the IBM Netfinity 10/100 Fault Tolerant Adapter device drivers: 1. Add the
  • IBM 8658 | User Guide - Page 94
    the drive and path where the driver is located. This command causes the device driver to locate the primary adapter and server to communicate with the integrated Netfinity Advanced System Management Processor. 84 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 95
    . This function enables you to connect the Advanced System Management Processors of several rack-mounted servers so that they can communicate with each other in half-duplex mode. Cabling the server When you cable the server, be sure to route the cables through the cable-restraint bracket on the rear
  • IBM 8658 | User Guide - Page 96
    Additionally, for rack models, be sure to route the cables through the cable-management arm on the rack. Cable straps 86 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 97
    from your IBM representative. Note: This section provides installation instructions for all operating systems supported by Netfinity Manager. However, not all operating systems described in this section are certified for use with all Netfinity server models. For a list of supported operating system
  • IBM 8658 | User Guide - Page 98
    disk space. All other system requirements are the same as for Netfinity Manager for OS/2. Note: Serial Connection Control will not function on systems that do not have a properly installed and configured modem. 88 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 99
    SNA Server software. However, Netfinity Manager systems running Microsoft SNA Server can communicate with other Netfinity Manager systems using any of the other supported SNA stacks. v A 9600 baud or greater modem (optional). The hard disk requirement for Client Services for Netfinity Manager
  • IBM 8658 | User Guide - Page 100
    Guide for additional installation instructions. d. Click Install Product to start the installation process. v Windows 95, 98, or NT a. Click the Start button. b. Click Run... from the Start button menu. c. Type x:\SCW95 90 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY
  • IBM 8658 | User Guide - Page 101
    then refer to the Client Services for Netfinity Manager User's Guide for additional installation instructions. e. Click Install Product to start the installation process. 4. Choose a drive and directory from which the Netfinity Manager program files will be copied. Type in the Directory to Install
  • IBM 8658 | User Guide - Page 102
    only on systems running Windows NT 4.0 or later) v Critical File Monitor v DMI Browser (requires DMI Service Layer) v ECC Memory Setup (requires ECC memory) v Event Scheduler v File Transfer v Power On Error Detect 92 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 103
    local use of the service only if the required hardware or system configuration is present. 9. Configure the Network Drivers. If the installation configuration allows for network access, enter information regarding the communication protocols that are supported by the system. The Netfinity Manager 93
  • IBM 8658 | User Guide - Page 104
    long, and must be unique to the system. If this name is not unique, it can prevent remote Netfinity Manager users from using the Serial Connection Control service to access the system. c. Enable the Network Driver. 94 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 105
    by a remote user. The alert includes the name of the service that was run and information about the user that started the service. v Show Network Support If the Show Network Support option is enabled, the Netfinity Manager Support Program (or Network Interface) will be visible as a minimized process
  • IBM 8658 | User Guide - Page 106
    support for one or more of these databases has been installed along with Netfinity Manager, data can be exported from these Netfinity Manager services: v Alert Manager v Software Inventory v System Information Tool 96 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 107
    support" on page 102. DB2 database support Support for DB2 database export is automatically configured during installation of the Netfinity Manager. However, the database system itself must be configured. Instructions the DB2 database manager. 2. Type the following command: DB2 CREATE databasename
  • IBM 8658 | User Guide - Page 108
    running, start the DB2 database manager. b. If you are not connected to the DB2 Netfinity database, connect to the database now. 2. Type the following command: DB2 GRANT privilegecode ON TABLE tablename TO userid 98 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 109
    : 1. Use the GRANT EXECUTE command to enable Netfinity Manager to access the database. Type the following command at the OS/2 prompt: DB2 GRANT EXECUTE ON PACKAGE NETFIN.DB2SQLC0 TO PUBLIC and then press Enter. Note: Specify PUBLIC or authorize only specific manager systems. To limit access to the
  • IBM 8658 | User Guide - Page 110
    E: and press Enter. 4. Type the following command at the OS/2 prompt: NETFINDB DELETE /DBNAME=databasename where databasename is the name of the database as specified during NETFINDB execution. 5. Press Enter. 100 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 111
    database support To enable the Netfinity Manager to export system data to a Lotus Notes database, the following must be done: 1. Install the Netfinity Manager database template on the Lotus Notes server. 2. Enable Netfinity Manager to export to the Lotus Notes server. Instructions on installing
  • IBM 8658 | User Guide - Page 112
    systems. Note: ODBC database export is available only on systems that are running Netfinity Manager. System requirements The minimum requirements for Netfinity Manager ODBC database export are: v Windows NT - ODBC 102 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 113
    . 4. On Windows NT, configure the Netfinity Support Program to export data using the ODBC database. a. Open Services from the Control Panel. b. Click Netfinity Support Program from the Services field, then click Startup. c. Click Automatic in the Startup Type button group. d. Click This Account in
  • IBM 8658 | User Guide - Page 114
    to export data. 3. To create the Netfinity Manager table groups within the database, click Create and then click OK to open the Database Server window. The following table actions are also available: v Delete 104 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 115
    95 Win NT 3.51 Win NT 4.0 OS/2 Warp Connect OS/2 Warp 4.0 IBM DB2 Version Yes Yes Yes Yes Yes 2.1.2 IBM DB2 Universal Yes Yes Yes Yes Yes Database 5.0 ODBC - IBM DB2 Version 2.1.2 Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Netfinity Manager 105
  • IBM 8658 | User Guide - Page 116
    , or Windows NT 4.0 only) or a Netfinity Manager program group (Windows NT 3.51 only) was added to the Desktop. The Netfinity Manager folder or program group contains the Netfinity Manager Service Manager object. 106 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 117
    , see "ODBC Database Support" in Netfinity Manager Quick Beginnings. 2. Start the Netfinity Service Manager. To start the Netfinity Service Manager, double-click the Netfinity Service Manager object. Netfinity Manager Service Manager All Netfinity Manager services that are supported by the operating
  • IBM 8658 | User Guide - Page 118
    of the Netfinity Manager User's Guide. Advanced System Management The Advanced System Management service provides extensive functionality available for your IBM PC Server Advanced System Management Adapter, 108 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 119
    date and time the alert was received, type and severity of the alert, the ID or deleted once problems are corrected. This service is available for stand- the performance of servers on the network File Monitor makes it simple to generate Netfinity alerts when an important System File (such
  • IBM 8658 | User Guide - Page 120
    service on any Netfinity Manager system in the network. The Netfinity Manager system on the network is organized into easy-to-manage logical groups that can be updated automatically using the auto-discovery feature. 110 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY
  • IBM 8658 | User Guide - Page 121
    supports at least 9600 baud for the Serial Connection Control service to function. Service Configuration Manager Service Configuration Manager can save the configuration of a Netfinity Manager service from a selected system to a service diagnose and resolve system problems. System Information Tool
  • IBM 8658 | User Guide - Page 122
    service is used with IBM computers. This service specific Netfinity Manager Network Interface (NETFBASE.EXE) in order to allow other time-sensitive applications to start up correctly or to allow your system to fully 112 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 123
    line functions. Client Services for Netfinity Installation and setup information for Client Services for Manager Quick Beginnings Netfinity Manager. Client Services for Netfinity Detailed information on how to use Client Services for Manager User's Guide Netfinity Manager. Netfinity Manager 113
  • IBM 8658 | User Guide - Page 124
    a source directory to distribute Netfinity Manager for OS/2, copy all of the files from the OS2/SERVICES directory into the source directory. 3. Copy the files from the appropriate Netfinity Manager directory. 114 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 125
    and the Netfinity Manager installation program command-line parameters. The Netfinity Manager installation program supports the following services from being installed. To create a customized installation, the INSTALL.INI file must be edited. For example, when creating a customized Netfinity
  • IBM 8658 | User Guide - Page 126
    IBM SysMgt Install Script, Version 2 (Do not remove this comment line) Netfinity Manager Installation [Manager 16900] Advanced System Management Support any service that you want to remove from the installation. 116 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 127
    item in a specific section, add all the necessary item information in the format shown in the following example. Before: Screen Capture GUI NULL Manager CL 0 1 SAVEG.EXE CL 0 1 SAVEG.HLP After: Screen Capture GUI NULL Manager CL 0 1 SAVEG.EXE CL 0 1 SAVEG.HLP CL 0 1 CUSTOM.INI Netfinity Manager 117
  • IBM 8658 | User Guide - Page 128
    118 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 129
    (FRUs) should be replaced by qualified service personnel only. Note: Before performing any LED card To remove the external LED card, do the following: 1. Power off the server. 2. Disconnect all external cables. 3. Remove the cover. See "Removing the cover, door . © Copyright IBM Corp. 2000 119
  • IBM 8658 | User Guide - Page 130
    To remove the on/off reset board: 1. Power off the server 2. Disconnect cables. 3. Press the arrow on the tab 1 to release. 4. Gently pull the power reset card 3 out of slots 2 to remove from the front panel. 120 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 131
    Removing the rear cable bracket 1 Rear cable bracket 2 Adhesive strip 3 Screws (2) To remove the on/off reset board: 1. Power off the server 2. Disconnect cables. 3. Press the arrow on the tab of the rear cable bracket 1 to release the bracket arm. 4. Carefully peel away the adhesive strip 2
  • IBM 8658 | User Guide - Page 132
    To remove the DASD backplane assembly: 1. Power off the server. 2. Disconnect all external cables from the server. 3. Remove the cover. See "Removing the cover, door Removing the power supply backplane 122 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 133
    1 Screws (9) 2 System Board To remove the system board: 1. Power off the server. 2. Disconnect all external cables from the server. 3. Remove the cover. See "Removing the cover, door, and bezel" on page (9) 1 . 9. Gently pull out the system board 2 to remove. FRU information (service only) 123
  • IBM 8658 | User Guide - Page 134
    124 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 135
    Symptom-to-FRU index This index supports Netfinity 5100 servers. The Symptom-to-FRU lists symptoms, errors, and the possible causes. The most likely cause is listed first. Use this Symptom-to-FRU index to help you decide which FRUs to have available when servicing the computer. The POST BIOS
  • IBM 8658 | User Guide - Page 136
    3-1-2 1. System Board (Interval timer channel 2 failed) 3-1-3 1. DIMM (RAM test failed above address OFFFFH) 2. System Board 3-1-4 (Time-Of-Day size against actual) 1. DIMM 2. System Board 3. Battery 126 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 137
    3-3-3 (No operational memory in system) 1. Install or reseat the memory modules, then do a 3 boot reset. See "Configuring the server" on page 31 2. DIMMs 3. System Board Two Short Beeps (Information only, the configuration has changed) 1. Run Diagnostics 2. Run Configuration/Setup Three Short
  • IBM 8658 | User Guide - Page 138
    Backplane 4. Hot-Swap Power AC Inlet Box No beep and no video 1. See "Undetermined Problems" on page 145 System will not 1. See"Power supply LED errors" on page 134 power hard drive.) 3. SCSI Backplane. 128 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 139
    on power supply 2. If off, replace power supply 2. 2. Power Backplane. OVER LED on 1. Install an optional additional power supply, or remove optional devices from the server. SMI LED on 1. Reboot the system. Symptom-to-FRU index 129
  • IBM 8658 | User Guide - Page 140
    .) FRU/Action 1. Ambient temperature must be within normal operating specifications. See"Features and specifications" on page 3. 2. Ensure fans are operating correctly. 3. -001 (Failed USB test) 1. System Board 130 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 141
    basic and extended configuration status and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable 3. SCSI Backplane 4. Adapter 075 test) 1. VRM 2 2. Microprocessor 2 165-XXX-000 (Failed Service Processor test) 1. System Board. Before replacing the System Board, ensure
  • IBM 8658 | User Guide - Page 142
    -XXX-002 (Failed BIOS Fixed Disk test) Note: If RAID is configured, the fixed disk number refers to the RAID logical array. 1. Fixed Disk 3 132 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 143
    with SCSI ID NN (Refer to the Help and Service Information appendix of the tape drive's User Guide). 4. System Board or SCSI Controller. (Run (The server must be powered-on.) FRU/Action 1. Clean the CD. 2. Run CD-ROM Diagnostic 3. CD-ROM Drive 1. Insert the end of a paper clip into the manual tray
  • IBM 8658 | User Guide - Page 144
    position; see "System board switches and jumpers" on page 44). Note: The power-on override switch (switch 5 of SW1) is intended for problem determination purposes only. Use of this switch will cause POST errors. 134 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 145
    devices. Power-on the system. If the DC Good LED comes on, replace the adapters and devices one at a time until you isolate the problem. 3. Power Supply 4. Power Backplane 5. System Board N/A POST error codes In the following error codes, X can be any number or letter. Error Code/Symptom FRU
  • IBM 8658 | User Guide - Page 146
    Board 188 (Bad EEPROM CRC #2) 1. Run Configuration/Setup 2. System Board 189 (An attempt was made to access the server with invalid passwords) 1. Run Configuration/Setup, enter the administrator password 136 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 147
    Error Code/Symptom FRU/Action 201 (Memory test error, see ″Memory Settings″ on page 34.) If the server does not have the latest level of BIOS installed, update the BIOS to the latest level and run the diagnostic program again. 1. DIMM 2. System Board
  • IBM 8658 | User Guide - Page 148
    . 2. Flash update the Service Processor. 1762 (Fixed Disk Configuration error) 1. Fixed Disk Cables 2. Run Configuration/Setup 2 3. Fixed Disk Adapter 4. Fixed Disk Drive 5. SCSI Backplane 6. System Board 138 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 149
    Error Code/Symptom 178X (Fixed Disk error) 1800 (No more hardware interrupt available for PCI adapter) 1962 (Drive does not contain a valid boot sector) 2400 (Video controller test failure) 2462 (Video memory configuration error) 5962 (IDE CD-ROM configuration error) 8603 (Pointing Device Error)
  • IBM 8658 | User Guide - Page 150
    installed) 1. Install operating system to hard disk drive. I9990650 (AC power has been restored) 1. Check cable 2. Check for interruption of power supply 3. Power Cable 140 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 151
    be powered-on the following might be causing the before you power-on the server. problem: 2. The cables for all external SCSI devices are v A failing SCSI Ambient temperature must be within normal operating specifications; (see"Features and specifications" on page 3.) DASD 1 Over Temperature
  • IBM 8658 | User Guide - Page 152
    ″X″) 1. Ambient temperature must be within normal operating specifications; (see "Features and specifications" on page 3. Fan error messages Message Action Fan on page 26. 1. See "Power checkout" on page 26. 142 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 153
    "Power checkout" on page 26. System shutdown Refer to the following tables when experiencing system shutdown related to voltage or temperature problems. Voltage related system shutdown Message Action System shutoff due to ″X″ current over max value 1. See "Power checkout" on page 26 (level
  • IBM 8658 | User Guide - Page 154
    temperature) 1. Ambient temperature must be within normal operating specifications (see "Features and specifications" on page 3.). System shutoff due to system Action 1. Reseat CPU 2. Reseat VRM 3. Replace CPU 144 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 155
    utility program" on page 37. 2. A corrupt CMOS can cause undetermined problems. Check the LEDs on all the power supplies, see"Power supply LED errors suppressor device (on the computer) v Modem, printer, mouse, or non-IBM devices v Each adapter v Drives v Memory-Modules (Minimum requirement = 512
  • IBM 8658 | User Guide - Page 156
    , and replacing that adapter does not correct the problem, suspect the System Board. 2. If you suspect a networking problem and all the system tests pass, suspect a network cabling problem external to the system. 146 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 157
    Index System Part (Model No.) 1 Terminator Card Assembly (All Models) 2 667/133 Processor Assembly (Models 1RY, 11Y) 2 733/133 Processor Assembly (Models 2RY, 21Y) 3 Voltage Regulator Module (All Models) 4 800/133 Processor Assembly (Models 3RY, 31Y) © Copyright IBM Corp. 2000 FRU
  • IBM 8658 | User Guide - Page 158
    1RY, 2RY, 3RY, 4RY, 00N6429 5RY) Foot Screw-in (4) (Models 11Y, 21Y, 31Y, 41Y, 51Y) 00N6411 Cable, Power Backplane to DASD Backplane (All Models) 00N6579 Cable, Power Backplane to System Board-I2C (All Models) 00N6581 148 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY
  • IBM 8658 | User Guide - Page 159
    Models) Cable, LVD SCSI (All Models) Cable, IDE (All Models) Cable, Floppy Disk Drive (All Models) Cable, Power Backplane to System Board-Power (All Models) Power Cord (All Models) Misc. Parts Kit (Models 1RY, 2RY, 3RY, 4RY, 5RY 37L2581 37L2582 37L2583 37L2585 Parts listing (Type 8658) 149
  • IBM 8658 | User Guide - Page 160
    United States of America FRU No. 01K9851 01K9853 12J5120 12J5122 12J5124 12J5126 12J5128 12J5987 55H6643 55H6646 76H4865 6952301 (110) 1838574 (220) 36L8886 (220V/15A) 150 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 161
    Note: The service procedures are designed to help you isolate problems. They are written with the assumption that you have model-specific training on all computers, or that are familiar with the computers, functions, terminology, and service information provided in this manual. © Copyright IBM Corp
  • IBM 8658 | User Guide - Page 162
    that you need to be familiar with before servicing an IBM mobile computer. General safety Follow these rules to server covers, unless instructed otherwise in the installation and configuration procedures. 152 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 163
    to decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock. work with very high voltages; these instructions are in the safety sections of maintenance personal injury and machine damage. v Do not service the following parts with the power on when they
  • IBM 8658 | User Guide - Page 164
    items installed to protect users and service personnel from injury. This guide addresses only those items. However to attachment of non-IBM features or options not covered by this inspection guide. If any unsafe Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 165
    especially useful when handling ESD-sensitive devices. v Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Note: The use of a grounding system is desirable but not required to protect against ESD damage. - Attach the ESD ground
  • IBM 8658 | User Guide - Page 166
    statements in this Netfinity Server Library begin with all caution and danger statements before performing any of the instructions. v Statement 1 DANGER Electrical current from power, devices. v Statement 2 156 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 167
    IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of controls or
  • IBM 8658 | User Guide - Page 168
    the power source. 2 1 v Statement 10 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. 158 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 169
    Importante: Todas as instruções de cuidado e perigo da :cit.Netfinity Server Library:ecit. começam com um número. Este número é utilizado para fazer referência ção das tomadas. 3. Remova os cabos de sinal dos conectores. 4. Remova todos os cabos dos dispositivos. Related service information 159
  • IBM 8658 | User Guide - Page 170
    -8986, para obter informações sobre como enviar a bateria pelo correio para a IBM. Instrução 3 PRECAUCIÓN: Quando produtos a laser (unidades de CD-ROM, unidades ticos, e evite exposição direta ao raio. Instrução 4 160 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 171
    fonte de energia elétrica. 2 1 CUIDADO: Instrução 10 CUIDADO: Não coloque nenhum objeto com peso superior a 82 kg (180 lbs.) sobre dispositivos montados em rack. Related service information 161
  • IBM 8658 | User Guide - Page 172
    162 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 173
    Related service information 163
  • IBM 8658 | User Guide - Page 174
    164 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 175
    Related service information 165
  • IBM 8658 | User Guide - Page 176
    166 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 177
    Related service information 167
  • IBM 8658 | User Guide - Page 178
    168 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 179
    Netfinity Server:ecit. sont précédées d'un numéro. Ce dernier permet de mettre en correspondance la consigne en anglais avec ses versions traduites dans la présente section. Par exemple, si une consigne de type et aux modems (sauf instruction contraire mentionnée dans les proc service information 169
  • IBM 8658 | User Guide - Page 180
    lithium usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre systè vitez une exposition directe au rayon. Notice n 4 170 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 181
    plusieurs cordons d'alimentation. Pour isoler totalement l'unité du réseau électrique, débranchez tous les cordons d'alimentation des socles de prise de courant. 2 1 Notice n 10 ATTENTION: Related service information 171
  • IBM 8658 | User Guide - Page 182
    Wichtig: Alle Sicherheitshinweise in dieser :cit.Netfinity Server-Bibliothek:ecit. beginnen mit einer Nummer. Diese Nummer sen. anschließen. 4. Netzstecker an Steckdose anschließen. 5. Gerät einschalten. 172 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 183
    Hinweis 2 ACHTUNG: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr , nicht direkt mit optischen Instrumenten betrachten und den Strahlungsbereich meiden. Hinweis 4 Related service information 173
  • IBM 8658 | User Guide - Page 184
    Servers auszuschalten, muß sichergestellt werden, daß alle Netzkabel aus den Netzsteckdosen herausgezogen wurden. 2 1 Hinweis 10 ACHTUNG: Keine Gegenstände, die mehr als 82 kg wiegen, auf Rack-Einheiten ablegen. 174 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 185
    Tutti gli avvisi di attenzione e di pericolo riportati nella pubblicazione :cit.Netfinity Server Library:ecit. iniziano con un numero. Questo numero viene utilizzato per elettriche. 3. Rimuovere i cavi di segnale dai connettori. 4. Rimuovere tutti i cavi dalle unità. Related service information 175
  • IBM 8658 | User Guide - Page 186
    batteria al litio, utilizzare solo una batteria IBM con numero parte 33F8354 o batterie dello l'esecuzione di procedure non descritti nel presente manuale possono provocare l'esposizione a radiazioni pericolose. : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 187
    dalla sorgente di alimentazione. 2 1 Avviso 10 ATTENZIONE: Non poggiare oggetti che pesano più di 82 kg sulla parte superiore delle unità montate in rack. Related service information 177
  • IBM 8658 | User Guide - Page 188
    178 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 189
    Related service information 179
  • IBM 8658 | User Guide - Page 190
    180 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 191
    Importante: Todas las declaraciones de precauciín de esta :cit.Biblioteca del servidor Netfinity:ecit. empiezan con un número. Dicho número se emplea para establecer una referencia de apertura de las cubiertas para este producto o para los dispositivos conectados. Related service information 181
  • IBM 8658 | User Guide - Page 192
    sustituir la batería de litio, utilice únicamente el número de pieza 33F8354 de IBM o cualquier tipo de batería equivalente que recomiende el fabricante. Si el sistema exposiciín perjudicial a las radiaciones. 182 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 193
    ín. Para eliminar la corriente eléctrica del dispositivo, asegúrese de desconectar todos los cables de alimentaciín de la fuente de alimentaciín. 2 1 Declaración 10 Related service information 183
  • IBM 8658 | User Guide - Page 194
    PRECAUCIÓN: No coloque ningún objeto que pese más de 82 kg (180 libras) encima de los dispositivos montados en bastidor. 184 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 195
    be encountered, use the following information to assist you in problem determination. If possible, have this information available when requesting assistance from Service Support and Engineering functions. v Machine type and model v Processor or hard disk upgrades v Failure symptom - Do diagnostics
  • IBM 8658 | User Guide - Page 196
    HelpFax OS/2 Netfinity ThinkPad The following terms are trademarks of other companies: Notes Lotus Development Corporation MMX and Pentium are trademarks or registered trademarks of Intel Corporation. 186 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 197
    UNIX is a trademark or registered trademark of The Open Group in the United States and other countries. Windows NT is a trademark or registered trademark of Microsoft Corporation. Related service information 187
  • IBM 8658 | User Guide - Page 198
    188 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY
  • IBM 8658 | User Guide - Page 199
  • IBM 8658 | User Guide - Page 200
    Part Number: 10K2615 Printed in USA S10K-2615-00 (1P) P/N: 10K2615
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
Netfinity
5100
Type
8658
Models
11Y,
21Y,
31Y,
41Y,
51Y,
1RY,
2RY,
3RY,
4RY,
5RY
S10K-2615-00
±²³