IBM 8658 User Guide - Page 12
Information - 31y
UPC - 087944602644
View all IBM 8658 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. IS THE SYSTEM IS NOT PART OF A CLUSTER? v Power-off the computer and all external devices. v Check all cables and power cords. v Set all display controls to the middle position. v Power-on all external devices. v Power-on the computer. v Record any POST error messages displayed on the screen. If an error is displayed, look up the first error in the "POST error codes" on page 135. v Check the information LED panel System Error LED; if on, see "Information panel system error LED" on page 128. v Check the System Error Log. If an error was recorded by the system, see "Symptom-to-FRU index" on page 125. v Start the Diagnostic Programs. See "Starting the diagnostic programs" on page 16. v Check for the following responses: a. One beep. b. Readable instructions or the Main Menu. 3. DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES? NO. Find the failure symptom in "Symptom-to-FRU index" on page 125. YES. Run the Diagnostic Programs. If necessary, refer to "Starting the diagnostic programs" on page 16. If you receive an error, go to "Symptom-to-FRU index" on page 125. If the diagnostics completed successfully and you still suspect a problem, see "Undetermined Problems" on page 145. 2 : Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y, 41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY