IBM IC35L020 Hard Drive Specifications - Page 130
Time required for Security Erase Unit completion, Removable Media Status Notification feature set
View all IBM IC35L020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Word Content 89 xxxxH 90 0000H 91 0000H 92 FFFEH 93 xxxxH 94 xxxxH 95-126 0000H 127 0000H 128 xxxxH Description Time required for Security Erase Unit completion Time = value * 2 (minutes) Time required for Enhanced security erase completion Current advanced power management value Master Password Revision Code Hardware reset result. Bit assignments 15-14 (=01) Word 93 is valid 13 CBLID- status 1= Above Vih 0= Below Vil 12- 8 Dev 1 H/W reset result 12 Reserved 11 PDIAG- assertion 1= assert 0= not assert 10- 9 How to determine the device number 00=Reserved 01=Jumper 10=CSEL signal 11=Some other method 8 Shall be set to one if Dev 1 7- 0 Dev 0 H/W reset result 7 Reserved 6 Respond for Dev 1. 1= resp. 0= not resp. 5 DASP- detection. 1= detect 0= not detect 4 PDIAG- detection. 1= detect 0= not detect 3 Device 0 diag. 1=pass 0= fail 2- 1 How to determine the device number 00=Reserved 01=Jumper 10=CSEL signal 11=Some other method 0 Shall be set to one if Dev 0 Current Automatic Acustic management value 15- 8 Vendor's Recommended Acoustic Management value 7- 0 Current Automatic Acustic Management value Reserved Removable Media Status Notification feature set 0000H = Not supported Device Lock Function. Bit assignments 15- 9 Reserved 8 Security Level 1= Maximum, 7- 6 Reserved 5 Enhanced erase 1= Support 4 Expire 1= Expired 3 Freeze 1= Frozen 2 Lock 1= Locked 1 Enable/Disable 1= Enable 0 Capability 1= Support 0= High Figure 84. Identify Device Information (5 of 6) Deskstar 60 GXP Hard disk drive specification 116