IBM IC35L020 Hard Drive Specifications - Page 196
Input parameters from the device on bus release, Sector Count, Sector Number, Cylinder High/Low, H
View all IBM IC35L020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Input parameters from the device on bus release Sector Count Bits 7-3 (Tag) contain the Tag of the command being released to the bus. Bit 2 (REL) is set to one. Bit 1 (I/O) is cleared to zero. Bit 0 (C/D) is cleared to zero. Sector Number, Cylinder High/Low, H n/a. SRV This parameter is cleared to zero when the device performs a bus release. This bit is set to 1 when the device is ready to transfer data. Input parameters from the device on Command Complete Sector Count Bits 7-3 (Tag) contain the Tag of the completed command. Bit 2 (REL) is cleared to 0. Bit 1 (I/O) is set to one. Bit 0 (C/D) is set to one. Sector Number, Cylinder High/Low, H These parameters represent the sector address of unrecoverable error-applicable only when an unrecoverable error has occurred. SRV This parameter means cleared to 0. Deskstar 60 GXP Hard disk drive specification 182