IBM IC35L020 Hard Drive Specifications - Page 166
preserved by POR. When B=0, MAX Address which is set by Set Max Address, When B=1
View all IBM IC35L020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Output parameters to the device B Option bit for selection whether nonvolatile or volatile. B=0 is volatile condition. When B=1, MAX Address which is set by Set Max Address command is preserved by POR. When B=0, MAX Address which is set by Set Max Address command will be lost by POR. B=1 is not valid when the device is in Address Offset mode. Sector Number In LBA mode this register contains LBA bits 0-7 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Cylinder High/Low In LBA mode this register contains LBA bits 8-15 (Low), 16-23 (High) which is to be set. (L=1) In CHS mode this register contains cylinder number which is to be set. (L=0) H In LBA mode this register contains LBA bits 24-27 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Input parameters from the device Sector Number In LBA mode this register contains max LBA bits 0-7 which is set. (L=1) In CHS mode this register contains max sector number. (L=0) Cylinder High/Low In LBA mode this register contains max LBA bits 8-15 (Low), 16-23 (High) which is set. (L=1) In CHS mode this register contains max cylinder number which is set. (L=0) H In LBA mode this register contains max LBA bits 24-27 which is set. (L=1) In CHS mode this register contains max head number. (L=0) Deskstar 60 GXP Hard disk drive specification 152